Removing an EMM blank
CAUTION: To maintain proper system cooling, make sure you install an EMM blank in the empty
slot.
1. Remove EMM 0. See Removing an EMM blank.
2. To remove the EMM blank, press down on the release latch and pull the blank away from the
enclosure.
Figure 11. Removing and installing an EMM blank
1. EMM blank 2. release latch
Installing an EMM blank
To install an EMM blank, align the blank with the EMM bay and insert the blank into the chassis until it
clicks into place.
Removing an EMM
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
1. Disconnect the SAS cables connected to the EMM.
2. Push down on the release tab and pull the release lever away from the chassis.
3. Hold the release lever and pull the module away from the chassis.
17