Dell MD1400 manual Wiring the power cables, Connecting the power cable to the power supply module

Models: MD1400

1 37
Download 37 pages 623 b
Page 24
Image 24

Wiring the power cables

WARNING: For equipment using –(48–60) V DC power supplies, a qualified electrician must perform all connections to DC power and to safety grounds. Do not attempt connecting to DC power or installing grounds yourself. All electrical wiring must comply with applicable local or national codes and practices. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow all safety instructions that came with the product.

The DC power supply module must be hard-wired to a DC power source in your environment by a qualified electrician. To wire your DC power supply module to a DC power source:

1.Make sure that the power switch is in the OFF position, and the power supply module is turned off.

2.Connect the open terminal (bare wire ends) to an appropriate DC power source. As specified in the following table:

Connect each wire on power cable to the matching wire or terminal on DC power source.

Each wire on the power cable is labeled with information for easy identification.

Figure 18. Dc power cable d-shell connector and terminals

Pin

Description

Wire Color

Wire Size

 

 

 

 

1

48V DC Safety Ground (F or G)

Green or Yellow

10 AWG

2

–48V DC Return (+)

Blue

10 AWG

3

–48V DC (–)

Black

10 AWG

Connecting the power cable to the power supply module

1.Make sure that the power switch is in the OFF mode before connecting the DC power cable.

2.Connect the DC power supply cable to the power supply module by plugging the power cables into the matching power supply module plug connector.

3.Secure the power cables to the power supply module by fastening the power cables firmly to the system using the attached (trapped) finger screws.

4.Install the screws to the corresponding screw holes on the system and tighten until the power connector is firmly held in place.

24

Page 24
Image 24
Dell MD1400 manual Wiring the power cables, Connecting the power cable to the power supply module

MD1400 specifications

The Dell MD1400 is a robust and versatile storage solution designed to meet the demands of modern data-intensive environments. It is particularly well-suited for organizations requiring high-performance storage that seamlessly integrates with existing infrastructures. The MD1400 features a compact 2U form factor, which allows for efficient use of rack space while ensuring ample storage capabilities.

One of the standout features of the MD1400 is its impressive scalability. Supporting up to 84 drives in a single rack, the system can accommodate a variety of drive types, including traditional spinning disks (HDDs) and solid-state drives (SSDs), enabling users to optimize performance based on their specific needs. The system is built to support both SAS and SATA interfaces, providing flexibility in drive selection and deployment.

The Dell MD1400 also incorporates advanced RAID technology, enabling users to implement data protection strategies that align with their organizational policies. With support for multiple RAID levels, including RAID 0, 1, 5, 6, 10, and 50, organizations can choose the optimal configuration to balance performance and data redundancy. This versatility ensures that mission-critical applications remain robust and can recover rapidly from hardware failures.

In terms of connectivity, the MD1400 utilizes dual controllers with redundant power supplies, ensuring high availability and minimal downtime. The dual-controller architecture allows for load balancing across multiple paths, which not only enhances performance but also ensures that data remains accessible even in the event of a controller failure.

The management of the MD1400 is another strong point, featuring an intuitive graphical user interface that simplifies storage configuration, monitoring, and maintenance tasks. The system supports various management protocols, providing seamless integration with existing IT ecosystems and making it easier for administrators to manage their storage resources effectively.

Additionally, the Dell MD1400 is designed with energy efficiency in mind. With options for low-power drives and efficient cooling mechanisms, organizations can reduce their total cost of ownership while contributing to sustainability initiatives.

In summary, the Dell MD1400 is a powerful storage solution that offers scalability, performance, and advanced data protection features. Its dual-controller architecture, flexible drive options, and user-friendly management make it an excellent choice for businesses looking to enhance their storage capabilities while ensuring data integrity and availability. Investing in the MD1400 allows organizations to stay ahead in an ever-evolving digital landscape.