![](/images/new-backgrounds/1110914/11091487x1.webp)
15If you selected Yes in the last step, then the Select Storage Array screen is displayed. Select the storage array that you want to configure for connectivity to the local host.
NOTE: The storage arrays configured by the utility are marked as Configuration Complete against their names in the list. This helps you to identify the arrays that are ready to be configured for host access.
16In the Storage Array Login screen, in the Controller# column, select the iSCSI host port of the storage array that needs to be configured and it’s IP address(es). In the Host Address column, from
See "Source Port Selection for iSCSI Host Ports" on page 46’ for more information about how these host IP addresses are listed in the
Click Next to continue to enter the log in information for another controller or Click Apply to save the log in information.
17In the Connect to Additional Arrays screen, select whether you want to connect to another storage array or not.
If you want to connect to another storage array, repeat the above steps starting from step 15.
If you do not want to connect to additional arrays, then click Finish on the final screen to exit the utility.
44