PARTS OF THE MS6130 HAND-HELD BAR CODE SCANNER

Becoming familiar with the features of the MS6130 hand-held scanner will help when operating one of these scanners. The illustration and list explain the pertinent parts.

Green and Red LED

Replaceable

Battery Pack

Output

Window Battery Charge

Contacts

Reactivation

Infra-red (IR)Switch

Sensor

Figure 4: Scanner Parts

Battery Charge Contacts Receptacle for the battery charger.

Reactivation Switch Turns the unit on after a timeout. Press the button from the bottom.

Green and Red LEDs When the red LED is on, the laser is on. If the green LED flashes on, the scanner has read a bar code successfully. Communication to the host is complete when the receiver beeps.

Infrared Object Sensor When a specified time has elapsed without any scanning, the unit will enter a “standby” mode. To reactivate the unit, remove the current object and present an object in front of the output window again.

Output Window

This aperture emits laser light.

19