Dell MS6130, MX003 26

COMPONENTS OF THE MS6130 SERIES STAND

The following are the components used to build the MS6130 series stand (MLPN: 45880).

1.Cradle

2.Stand Charger Pack

3.Pole Cover

4.Flex pole

5.Stand Base Cover

6.Stand Base

7.Charger Transformer

8.Charger Pack Screws

9.Mounting Screws

10.Lock Washer

CABLE

CONNECTS

THROUGH

OPENING

Figure 5: Scanner Parts

Contents

Page Page Page Page Page Page Page Page Transmitter Group: Receiver Group: Except version Version 17 only Note: Page Load Defaults Enter/Exit Program Mode for the Receiver Enter/Exit Program Mode KB Parameter - Keyboard Type KB Parameter – Keyboard Type KB Parameter - Caps Lock Mode KB Parameter - Alt Mode Enable Alt Mode **Disable Alt Mode KB Parameter - Inter Scan Code Delay (AT and PS/2 Modes) ** 800 Microsecond Delay Page Use the MS700i/MS720i scanner to scan the following bar codes Enable RF Low Speed Option Page Page Battery Charge Contacts Reactivation Switch Green and Red LEDs Infrared Object Sensor Output Window Page Stand LED Indicators CHARGE STATE CHARGE LED STATUS How to Recondition Recondition if: Recondition once a week if: Recondition once every two weeks if: Charge State No Red or Green Red Flash; Green Flash; Steady Red Steady Red; Green Flash Repetitive Red Flashes One Beep Razzberry Tone Two Beeps Three Beeps Page Page Page Specifications Page Page Default Settings of the MS6130 and “MX” Receiver Page Page Page MX003 Series Scanner Interface Pin Assignments Warranty and Disclaimer Limited Warranty North America Headquarters Germany Notices Patents