VISUAL INDICATORS
The scanner has red and green LEDs. When the scanner is on, the LEDs indicate the status of the scan and scanner.
| No Red or Green | The scanner will turn off if the scanner has | ||||
|
|
|
|
| been dormant for a specified time. To |
|
|
|
|
| reactivate the unit, direct the output window |
|
|
|
|
| up then down toward the bar coded product. |
|
|
|
|
| If the unit has been dormant for longer than |
|
|
|
|
| 10 minutes, reactivating the unit by pressing |
|
|
|
|
| the button on the side of the MS6130 will be |
|
|
|
|
| necessary. |
| Red Flash; Green Flash; | When the scanner first receives power, the | ||||
|
|
|
|
| steady red LED will flash, followed by the |
|
|
|
|
| green LED. |
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| Steady Red | When the laser is on, the red LED will also be | ||||
|
|
|
|
| on. This occurs when an object is in the scan |
|
|
|
|
| field. If the scanner does not detect a bar |
|
|
|
|
| code within approximately 2.5 seconds, the |
|
|
|
|
| |
|
|
|
|
| red LED will shut off indicating that the laser is |
|
|
|
|
| no longer on. If the red LED remains on for |
|
|
|
|
| longer than 7.5 seconds, then the scanner is |
|
|
|
|
| in program mode. |
| Steady Red; Green Flash | When the scanner successfully reads a bar | ||||
|
|
|
|
| code, the green LED will flash. If the green |
|
|
|
|
| LED does not flash, then the bar code read |
|
|
|
|
| was not successful. |
|
|
|
|
|
|
| Repetitive Red Flashes | When the red LED flashes several times while | ||||
|
|
|
|
| it lays upon a stationary surface, then an |
|
|
|
|
| object is within the scan field and is activating |
|
|
|
|
| the IR sensor. This can occur even while the |
|
|
|
|
| scanner is lying upon the counter or cradle. |
|
|
|
|
| |
|
|
|
|
| To eliminate this disturbance, direct the scan |
|
|
|
|
| window toward a different location. |
24