Dell MS6130, MX003 32

AUDIBLE INDICATORS (CONTINUED)

The “MX” receiver can be programmed to emit three beeps when the timeout occurs during communication between the host and receiver. Refer to the MS4120 Programming Guide section, Audible Indicators for Communication Timeouts to program this feature.

There are four settings available for the tone of the beep for the receiver. Refer to the MS4120 Programming Guide section, Beeper Tones to program the feature to change the tone or turn the beeper off.

Contents

Page Page Page Page Page Page Page Page Transmitter Group: Receiver Group: Except version Version 17 only Note: Page Load Defaults Enter/Exit Program Mode for the Receiver Enter/Exit Program Mode KB Parameter - Keyboard Type KB Parameter – Keyboard Type KB Parameter - Caps Lock Mode KB Parameter - Alt Mode Enable Alt Mode **Disable Alt Mode KB Parameter - Inter Scan Code Delay (AT and PS/2 Modes) ** 800 Microsecond Delay Page Use the MS700i/MS720i scanner to scan the following bar codes Enable RF Low Speed Option Page Page Battery Charge Contacts Reactivation Switch Green and Red LEDs Infrared Object Sensor Output Window Page Stand LED Indicators CHARGE STATE CHARGE LED STATUS How to Recondition Recondition if: Recondition once a week if: Recondition once every two weeks if: Charge State No Red or Green Red Flash; Green Flash; Steady Red Steady Red; Green Flash Repetitive Red Flashes One Beep Razzberry Tone Two Beeps Three Beeps Page Page Page Specifications Page Page Default Settings of the MS6130 and “MX” Receiver Page Page Page MX003 Series Scanner Interface Pin Assignments Warranty and Disclaimer Limited Warranty North America Headquarters Germany Notices Patents