1. Follow the instructions in Before You Begin.
2. Connect the camera cable to the connector on the camera module. Replace the tape to secure the camera cable to the camera module.
3. Align the slots on the camera module with the alignment guides on the display cover.
4. Adhere the camera module on the display cover.
5. Replace the display panel (see Replacing the Display Panel).
6. Replace the display bezel (see Replacing the Display Bezel).
7. Replace the display assembly (see Replacing the Display Assembly).
8. Replace the palm rest (see Replacing the Palm Rest).
9. Replace the keyboard (see Replacing the Keyboard).
10. Replace the memory module(s) (see Replacing the Memory Module(s)).
11. Replace the module cover (see Replacing the Module Cover).
12. Follow the instructions from step 4 to step 5 in Replacing the Optical Drive.
13. Replace the battery (see Replacing the Battery).
Back to Contents Page
1
camera
module
2
camera cable
connector
CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.