Dell N4010 - page 33


1. Follow the instructions in Before You Begin.

2. Align the screw holes on the I/O board with the screw holes on the computer base.

3. Replace the three screws that secure the I/O board to the computer base.

4. Connect the I/O board cable to the connector on the system board.

5. Replace the middle cover (see Replacing the Middle Cover).

6. Replace the display assembly (see Replacing the Display Assembly).

7. Replace the palm rest (see Replacing the Palm Rest).

8. Replace the keyboard (see Replacing the Keyboard).

9. Replace the memory module(s) (see Replacing the Memory Module(s)).

10. Replace the module cover (see Replacing the Module Cover).

11. Follow the instructions from step 4 to step 5 in Replacing the Optical Drive.

12. Replace the battery (see Replacing the Battery).

Back to Contents Page

CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.