Back to Contents Page
Optical Drive
Dell™Inspiron™N4010ServiceManual
Removing the Optical Drive
Replacing the Optical Drive

Removing the Optical Drive

1. Follow the instructions in Before You Begin.
2. Remove the battery (see Removing the Battery).
3. Remove the screw that secures the optical-drive assembly to the computer base.
4. Slide the optical-drive assembly out of the optical-drive compartment.
5. Remove the two screws that secure the optical-drive bracket to the optical drive.
6. Pull the optical-drive bezel to detach it from the optical drive.
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION: Onlyacertifiedservicetechnicianshouldperformrepairsonyourcomputer.DamageduetoservicingthatisnotauthorizedbyDell™
is not covered by your warranty.
CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface (such as a connector on your computer).
CAUTION: To help prevent damage to the system board, remove the main battery (see Removing the Battery) before working inside the
computer.
1
optical-drive assembly
2
screw
1
screws (2)
optical-drive bracket
3
optical drive
optical-drive bezel