Back to Contents Page
AC Adapter Connector
Dell™Inspiron™N4010ServiceManual
Removing the AC Adapter Connector
Replacing the AC Adapter Connector

Removing the AC Adapter Connector

1. Follow the instructions in Before You Begin.
2. Remove the battery (see Removing the Battery).
3. Follow the instructions from step 4 to step 15 in Removing the System Board.
4. Remove the display assembly (see Removing the Display Assembly).
5. Remove the middle cover (see Removing the Middle Cover).
6. Remove the daughter board (see Removing the Daughter Board).
7. Remove the screw that secures the AC adapter connector to the computer base.
8. Make a note of the AC adapter connector cable routing and lift the AC adapter connector out of the computer base.

Replacing the AC Adapter Connector

1. Follow the instructions in Before You Begin.
2. Route the AC adapter connector cable and place the AC adapter connector on the computer base.
3. Replace the screw that secures the AC adapter connector to the computer base.
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION: Onlyacertifiedservicetechnicianshouldperformrepairsonyourcomputer.DamageduetoservicingthatisnotauthorizedbyDell™
is not covered by your warranty.
CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface (such as a connector on your computer).
CAUTION: To help prevent damage to the system board, remove the main battery (see Removing the Battery) before working inside the
computer.
1
screw
2
AC adapter connector
3
AC adapter connector cable