Back to Contents Page
Speakers
Dell™Inspiron™N4010ServiceManual
Removing the Speakers
Replacing the Speakers

Removing the Speakers

1. Follow the instructions in Before You Begin.
2. Follow the instructions from step 2 to step 15 in Removing the System Board.
3. Remove the four screws (two on each speaker) that secure the speakers to the computer base.
4. Make a note of the speakers cable routing and lift the speakers along with the cable, off the computer base.

Replacing the Speakers

1. Follow the instructions in Before You Begin.
2. Place the speakers on the computer base and route the speakers cable.
3. Replace the four screws that secure the speakers to the computer base.
4. Follow the instructions from step 6 to step 20 in Replacing the System Board.
Back to Contents Page
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION: Onlyacertifiedservicetechnicianshouldperformrepairsonyourcomputer.DamageduetoservicingthatisnotauthorizedbyDell™
is not covered by your warranty.
CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface (such as a connector on your computer).
CAUTION: To help prevent damage to the system board, remove the main battery (see Removing the Battery) before working inside the
computer.
1
speakers (2)
2
screws (4)
CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.