Dell D830, PP04X manual c Lift the card out of its connector

1 2

1 WLAN card 2 metal securing brackets (2)

cLift the card out of its connector.

NOTICE: The card connector is keyed to ensure correct insertion. If you feel resistance, reinstall the card to realign it in the connector.

NOTE: Do not insert a WWAN network card into the WLAN card slot.

NOTE: The WLAN card may have two or three antenna connectors, depending on the type of card you ordered.

6Install the card:

NOTICE: To avoid damaging the WLAN card, never place cables on top of or under the card.

aMove any antenna cables out of the way to make space for the WLAN card.

bAlign the card with the connector at a 45-degree angle, and press the card into the connector until it clicks.

NOTE: Your WLAN card may have two or three antenna connectors, depending on the type of card you ordered. Most antenna connectors have color-coded markings that correspond to the color of the cable.

NOTE: For more specific information about which cable to connect to which connector, see the documentation that came with your WLAN card.

7Connect the antenna cables to the WLAN card, ensuring that you route the cables correctly.

Adding and Replacing Parts

113