![](/images/new-backgrounds/1180196/18019641x1.webp)
1 M2.5 x
3 display cover | 4 inverter backlight cable |
6.Lift the display panel out of the display cover and lay the display panel flat on your workspace. Use extreme care when handling the display near the hinges and cables on the display cover to prevent damage to the display.
7.Disconnect the display cable by first squeezing the release tabs together, then separating the cable from of the connector.
1
back of display panel
2
display panel cable connector
8. Remove the four M2 x
Removing an LED Display Panel
CAUTION: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage on www.dell.com at: www.dell.com/regulatory_compliance.
1.Follow the instructions in Before Working on Your Computer.
2.Remove the display assembly (see Removing the Display Assembly).
3.Remove the display bezel (see Removing the Display Bezel).
4.Remove the four M2.5 x