![](/images/new-backgrounds/1180196/180196139x1.webp)
Replacing a WPAN/UWB Card
NOTICE: To avoid damage to the WPAN/UWB card, ensure the cables are not under the card when you replace the card.
NOTICE: The
1.Slide the WPAN/UWB card into the connector at a
2.Press the card down onto the alignment post and hold in position.
3.Install the M2 x
4.Connect the blue antenna cable to the WPAN/UWB card.
5.Install the left hinge cover (see Replacing the Hinge Covers).
6.Install the bottom of the base assembly (see Removing the Bottom of the Base Assembly).
7.Follow the procedure After Working on Your Computer.