![](/images/new-backgrounds/1180196/18019679x1.webp)
5. If a memory module is installed into the DIMM B socket, replace it using procedures in DIMM B.
DIMM B
1.Ground yourself by touching a
2.Remove the memory module from its
3.Slide the memory module into the DIMM B connector at a
4.Push the long edge of the memory module down until retaining clips lock the module in place.
NOTE: If the memory module is not installed properly, the retaining clips will not hold the module securely and the computer may not boot properly. No error message indicates this problem.
Verifying System Operation
1.Slide the bottom of the base assembly into place and tighten the captive screw.
2.Follow the procedure After Working on Your Computer.
3.Set the computer upright and open the display.
4.
5.To confirm the amount of memory installed in the computer:
•In the Microsoft® Windows Vista® operating system, click Start → Help and Support→ Computer Information.
•In the Microsoft Windows® XP operating system,