Menu Item Description
NOTE: This field does not apply to 84-key keyboards.
Report Keyboard
Errors
Allows you to set whether keyboard-related error messages are reported during
system boot. By default, the Report Keyboard Errors field is set to Report.
F1/F2 Prompt on
Error
Allows you to enable or disable the F1/F2 prompt on error. By default, F1/F2
Prompt on Error is set to Enabled.
In-System
Characterization
This field enables or disables In-System Characterization. By default, In-System
Characterization is set to Enabled.
System And Setup Password Features
You can create a system password and a setup password to secure your system. To enable creation of
the system and setup password, the password jumper must be set to enabled. For more information on
the password jumper settings, see System Board Jumper Settings.
System
password
This is the password that you must enter to log on to your system.
Setup
password
This is the password that you must enter to access and make changes to the BIOS
or UEFI settings of your system.
CAUTION: The password features provide a basic level of security for the data on your system.
CAUTION: Anyone can access the data stored on your system if the system is running and
unattended.
NOTE: Your system is shipped with the system and setup password feature disabled.

Assigning A System And/Or Setup Password

NOTE: The password jumper enables or disables the System Password and Setup Password
features. For more information on the password jumper settings, see System Board Jumper
Settings.
You can assign a new System Password and/or Setup Password or change an existing System Password
and/or Setup Password only when the password jumper setting is enabled and Password Status is
Unlocked. If the Password Status is Locked, you cannot change the System Password and/or Setup
Password.
If the password jumper setting is disabled, the existing System Password and Setup Password is deleted
and you need not provide the system password to log on to the system.
To assign a system and/or setup password:
1. To enter System Setup, press <F2> immediately after a power-on or reboot.
2. In the System Setup Main Menu, select System BIOS and press <Enter>.
The System BIOS screen is displayed.
3. In the System BIOS screen, select System Security and press <Enter>.
The System Security screen is displayed.
21