Dell UPS Local Node Manager
USER'S GUIDE EXTENSION FOR MICROSOFT VIRTUAL ARCHITECTURES
Dellups.com
2.9.2. STEP 2 (CONFIGURATION)
When started, the application automatically performs a Quick scan.
∙Using the Quick scan operation, you will discover:
=>Serial line connected UPSs (RS232 or USB)
The discovered UPS connected through (RS232 or USB) is automatically assigned as the Power source (the Status icon is Green 
)
=> Networked UPSs through broadcast within a few seconds (Dell UPS Management Card H910P)
The discovered UPS connected through (Network) are not automatically assigned as the
Power source (You have to select the node and click on the button Set as Power Source the icon becomes Green 
)
The discovered nodes are displayed in Settings Auto Discovery
For the other nodes, please perform the discovery based on IP address ranges (Range scan)
∙Using the Range Scan operation you will discover the nodes that are outside of the Network segment and nodes that are not compatible with the ”Quick scan” feature.
In the Settings Shutdown page, assign the IP address of the UPS that powers the local Computer.
In the Settings User List page, assign the access rights through “login and password”
Dell ULNM - User guide extension - HyperV R1 & R2
rev0.01
CHAPTER: Installation
14
