Wide Mode | Adjusts the image ratio as 1:1, Aspect or full screen. |
NOTE: Wide Mode adjustment is not required at maximum preset resolution 1600 x 900.
| Horizontal Position | Use the |
| or | button to adjust image left and right. Minimum is '0' | ||
|
|
| |||||
|
|
|
|
|
|
|
|
| Vertical Position | Use the |
| or | button to adjust image up and down. Minimum is '0' | ||
|
|
| |||||
|
|
|
|
|
|
|
|
| Sharpness | This feature can make the image look sharper or softer. Use | or | to adjust the sharpness from '0' to '100' . | |||
|
| ||||||
|
|
| |||||
| Pixel Clock | The Phase and Pixel Clock adjustments allow you to adjust your monitor to your preference. These settings are accessed | |||||
|
| through the main OSD menu, by selecting 'Image Settings'. |
|
| |||
|
| Use | or |
| button to adjust for best image quality. |
|
|
|
|
| |||||
| Phase | If satisfactory results are not obtained using the Phase adjustment, use the Pixel Clock (coarse) adjustment and then use Phase | |||||
|
| (fine), again. |
|
|
|
| |
|
| NOTE: Pixel Clock and Phase Adjustments are only available for "VGA" input. | |||||
|
|
|
|
| |||
| Reset Display | Resets the display settings to the original factory settings. |
|
| |||
| Settings |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Back |
|
|
|
|
|
|
|
| Press |
| to go back to the main menu. |
|
| |
|
|
| |||||
| Other Settings | Select this option to adjust the settings of the OSD, such as, the languages of the OSD, the amount of time the menu remains on | |||||
|
| screen, and so on. |
|
| |||
Language | Language option to set the OSD display to one of six languages (English, Espanol, Francais, Deutsch, Simplified chinese or | ||
| Japanese). |
|
|
Menu Transparency | Select this option to change the menu transparency by pressing | or | (Minimum: 0 ~ Maximum: 100). |
