Dell X50 manual Using the Battery, Installing and Removing the Battery

Using the Battery

CAUTION: Before performing any of the procedures in this section, read and follow the safety instructions on page 5.

NOTICE: Do not use your device until you have charged the main battery for at least 8 hours for the first charge.

Before you use your device for the first time, you must install and charge the battery. Once the battery is charged, use the power properties to monitor the battery charge. See Pocket PC Help on the device for more information.

Installing and Removing the Battery

To install the battery:

1Ensure that the device is turned off.

2Align the battery contacts with the contacts in the battery slot, insert the battery, and lower the battery into the slot until you feel a click.

battery

3Close the battery cover.

4Lock the battery cover by sliding the battery latch to the right.

NOTE: The device starts immediately once you insert the battery for the first time and lock the battery latch.

System Information Guide

13