CORRECT POSITIONING OF THE TRIPLE RING BURNER
✓The triple ring burner must be correctly positioned (see fig. 26 ); the burner ribs must be fitted in their housing as shown by the arrow.
The burner correctly positioned must not rotate (fig. 27 ).
Then position the cap “A” and the ring “B” (figs. 27 - 28). They shall be level.
✓The pan support shall be correctly po- sitioned as indicated in fig. 29 . The pan support shall be level and must not rotate.
Figure 26
Ignitor "S"
Flame failure probe "T"
Figure 27 | A | B |
Figure 28
Figure 29
23
