ENAMELLED PARTS
✓All the enamelled parts must be cleaned with a sponge and soapy water only or other
✓Dry preferably with a soft cloth.
✓If acid substances such as lemon juice, tomato conserve, vinegar etc. are left on the enamel for a long time they will etch it, making it opaque.
STAINLESS STEEL SURFACES
✓Stainless steel parts should be rinsed with water and dried with a microfibre or soft cloth.
✓For persistent dirt, use specific
GAS TAPS
✓Periodic lubrication of the gas taps must be carried out by specialist personnel only.
✓In the event of operating faults in the gas taps, call the Service Department.
CONTROL KNOB/S
✓The control knob/s may be removed for cleaning but care should be taken not to damage the seal.
19