13.2.10 UPC/EAN Shared Settings | Psion Teklogix PX750 specs

Chapter 5: Configuration

Decoded (Internal) Scanners

5.13.2.10 UPC/EAN Shared Settings

The parameters you set here are a shared across all available UPC and EAN bar codes.

Enable Bookland EAN

Setting this parameter to on allows your scanner to recognize Bookland EAN bar codes.

Supplementals

Supplementals are additionally appended characters (2 or 5).

Double-tapping this parameter displays a list of options. If Ignore is chosen, UPC/EAN is decoded and the supplemental characters are ignored. If Decode is chosen, UPC/EAN symbols are decoded with supplementals. Autodiscriminate works in conjunction with the Supp. Redundancy parameter.

Supp. Redundancy

With “Autodiscriminate” selected in the Supplementals parameter, Supp. Redundancy adjusts the number of times a symbol without supplementals is decoded before transmission.

When you double-tap on this parameter, a dialog is displayed in which you can enter a value between 2 and 20. A value of 5 or above is recommended when Autodiscriminate is selected and you are decoding a mix of UPC/EAN symbols with and without supplementals.

Security Level

This parameter controls the tolerance for decoding edge-to-edge UPC/EAN bar codes. Double-tapping on this parameter displays a dialog box in which you can choose a level from 0 to 3. Lower values have a lower tolerance for misreads, but they also increase the time it takes to decode the bar code.

Linear Decode

Linear Decode applies to code types containing two adjacent blocks (e.g., UPC-A, EAN-8, EAN-13). When enabled, a bar code is transmitted only when both the left and right blocks are successfully decoded within one laser scan. This option should be enabled when bar codes are in proximity to each other.

2D UPC Half Block Stitching

Setting this parameter to on enables “UPC Half Block Stitching” for the omnidirectional scanner engine only.

146Psion Teklogix NEO Hand-Held Computer User Manual

Image 158

Psion Teklogix PX750 13.2.10 UPC/EAN Shared Settings, Enable Bookland EAN, Supplementals, Supp. Redundancy, Linear Decode

Contents

NEO Hand-Held Computer Copyright 2009 by Psion Teklogix Inc., Mississauga, Ontario Return-To-Factory Warranty DisclaimerPage Table of Contents Features Of NEO Getting To Know NEO Configuration Working With Windows CE TweakIT Scanner Settings Peripheral Devices & Accessories Specifications Appendix B Wireless Zero Config Appendix a Pinouts Introduction Page About This Manual Text Conventions NEO Hand-Held Computer Features Model Variants Connected NEO Standard Features NEO Hand-Held Computer Numeric & Alpha-Numeric Operating System Batch NEO Standard FeaturesPlatform Programming Environment Bar Code Applications Wireless CommunicationsApplication Software Internal Expansion Slots Power Management Accessories Basic Checkout Page Backup Battery Power Switching NEO On And OffBattery Installing The Battery And Switching The Unit On Calibrating The Touchscreen Wireless NetworkingSwitching The Unit Off Suspend Status Tab Wi-Fi Config Tab Authentication Modes Open Authentication 802.1X, WAP & WAP2 Enterprise And Cckm WEP Wired Equivalent PrivacyWPA & WPA2 Personal PSK Pre-Shared Key 2.2 EAP Server Certificate Verification Encryption Connecting The Wireless Network Configuring TCP/IP IP Address Tap on the IP Information tab Name Server Advanced Tab Data Transfer Between The PC And The Hand-Held Using Microsoft ActiveSyncChecking The Scanner Performing a Warm Reset Resetting NEOUsing Microsoft Vista Performing a Cold Reset Getting to Know NEO Page Features Of NEO Front View Battery Battery Safety Battery Swap Time Removing The Battery PackCharging The Battery Charging Options Switching The Hand-Held On And Off Switching Off NEO Suspend Activating Modifier Keys KeyboardModifier Keys Locking Modifier Keys Keys Scan Key 4 26-Key Keyboard Accessing Alpha KeysFunction Keys And Macro Keys Function Keys Choosing a Single Alpha Character Creating Uppercase Letters Keyboard Backlight Adjusting The Display BacklightDisplay Calibrating The Touchscreen NEO Hand-Held Indicators LED Indicator Audio Indicators NEO Scanner LED Behaviour Scan Status Onscreen Indicators Adjusting The Receiver Volume Windows Start Button Modifier Key IndicatorsBattery Gauge Radio Signal Quality Monitoring The Battery And Maximizing Run TimeBattery Charge Docking Device Storing Batteries Bluetooth Radio Uploading Data In a Docking Station Inserting The Card Pairing a Bluetooth Headset Or Other Bluetooth DeviceMicroSD Card Inserting The Card Caring For The Touchscreen General MaintenanceCleaning NEO Page Working with Windows CE 5.0 Page Navigating In Windows CE Navigating Using a Touchscreen And StylusNavigating Using The Keyboard Working With Files, Folders And Programs Space Startup Desktop NEO Startup Desktop Desktop Icons Using The Taskbar Taskbar Customizing The Taskbar Taskbar General Tab Taskbar Advanced Tab Taskbar Security Tab Start Menu Assigning The Supervisor Security Level Security SettingsDesktop Changing a Password Configuring Security ActiveSync Command PromptPrograms Demo Windows Explorer ShortcutsRemote Connect System Tray Cycle Tasks Task Manager Settings Control Panel Network And Dial-Up Connections 6 RunShutdown Taskbar And Start Menu Cold Reset Using a Dialog BoxWarm Reset Suspend Dialog Boxes Using a Dialog Box CONFIGURATION5 Page Options 136 Page Remote Connect TekTerm Application Control Panel Certificates Control Panel IconsApp Launch Keys Dialing Error ReportingDate/Time Display Owner PasswordPower PC Connection Volume & Sounds Teklogix Error Handling ServiceTweakIT Settings Remove Programs Display Backlight Basic SetupDisplay Properties Dim For IntensityBright For Display Appearance External Power CheckboxKeyboard Properties Repeat Delay Key Repeat Repeat Rate Sequence Keyboard Backlight On For OneShot Keyboard One Shot ModesLock Recording And Saving a Macro OneShot/LockKeyboard Macro Keys Executing a Macro Deleting a Macro Unicode Mapping Adding And Changing Unicode Values Removing Unicode Values Scancode Remapping Adding a Remap Virtual Key, Function And Macro Editing a Scancode Remap Removing a Remap Lock Sequence Volume And Sound Properties Volume Icon Volume Adjustments Sound Adjustments Power Properties Battery Capacity Suspend Timeout Power Saving SuspendPower Source Suspend Threshold Devices Low Power WarningsAdvanced Allow Suspend With Calibration Stylus PropertiesDouble-Tap Manage Triggers Touch Trigger Mappings Manage Triggers Icon Add Double-ClickShow All Modules Edit Add And Edit Trigger Mapping Trigger Key Trigger-Press Type Certificate AssignmentAdd Key Module Trigger Bluetooth Setup Tap on SettingsControl PanelBluetooth icon Pairing a Device Devices Tab Services Scan Set PIN Headset Servers Tab Outgoing Tab Active Conn. Tab Properties Tab Bluetooth Gprs WAN Connection Search For Tab Choose the Make New Connection icon Bluetooth Gprs WAN Connection 115 Bluetooth Gprs WAN Connection Total Recall Creating a Backup Profile Profile Information Add Files Creating a Backup Profile View Selections Formatting a Memory Card Storage ManagerRestoring a Profile Perform The Operation Creating Partitions Partition Management Type a name for the partition 125 IPv6 Support 12 IPv6 Support Icon TweakIT Advanced Interface And Network Advanced Services SettingsEnable IPv6 Modem Logging Sntp Simple Network Time Protocol Server Internet Explorer SettingsFTP Server Directional Tabbing, Fit-to-Screen and Focus Rectangle User Font Size User Display SettingsUser System Settings Docking Port Message Error Reporting Registry Editor Teklogix Error Handling Service ErrorLogInfo NetLog Scanner Settings Bar Codes Restoring Default Settings Scanner Decoded Internal Scanners Options Low Power Timeout Decoded Internal Advanced Options Continuous Scan ModeMinimum Cancel Time Aim Duration Linear Security Level Decoded Internal Data Options Transmit Code ID Char Bi-Direction RedundancyScan Angle Scan Data Format ECI Decoder Code EnabledEnable Trioptic Code Convert To Code Transmit Check Digit Set Length L1 And Set Length L2Check Digit Verification Full Ascii Add/Remove Data Decode Perf. LevelLength Restriction Enable GS1-128/GS1 US Enable Isbt UPC a Enabled 13.2.6 EAN Enabled13.2.7 EAN Enabled EAN-8 Zero Extend UPC-E And UPC-E1 Check Digit UPC E Enable UPC-EEnable UPC-E1 UPC-E And UPC-E1 Preamble Supplementals 13.2.10 UPC/EAN Shared SettingsEnable Bookland EAN Supp. Redundancy Codabar Enabled Notis Editing MSI Plessey EnabledClsi Editing Check Digits Interleaved 2 Enabled Check Digit Algorithm Discrete 2 Enabled Convert To EAN Composite Enable CC-C And Enable CC-ABEnable TLC-39 Linear Transmission Only Decoded Iscp Options Laser On Time Decoded Iscp Advanced Options Continuous Scan ModeDecoded Iscp Code Enable Same Read TimeoutDiff Read Timeout Same Read Validate Minimum Length Start/Stop TransmitAccepted Start Char Gtin Compliant GS1-128GS1-128 Identifier FNC1 Conversion EAN 13 Settings Enabled Isbn Conversion Transmit Number System 13.3.6 EAN EnabledUPC E Enabled Addendum 13.3.9 UPC/EAN Shared SettingsConvert To UPC-A Addendum Add-on 2 And Addendum Add-on 159 Clsi Library System Length ModeEnable Plessy Set Length L1, Set Length L2, And Set Length L3 Plessy Transmit Check Digit Plessy Minimum Length Interleaved 2 Enabled Matrix 2 Enabled Standard 2 of 5 Format Format Telepen Enabled13.3.18RSS Code Reduced Space Symbology Enable Enable RSS Expanded Enable RSS-14Enable RSS Limited 13.3.19Composite 13.3.20TLC-39 Enable Enabled Length Restriction Code 128 Emulation 13.3.23Codablock Enable Codablock aEnable Codablock F Click Data Options TabDouble Click Parameters Click Time msec Display Parameters Scan Result Scan IndicatorSoft Scan Timeout Scan Result Time sec Data Handling Codepage Translations Tab Case Rules 173 Page Peripheral Devices & Accessories Page Carrying Accessories Carrying Accessories Carrying Accessory Model Number Attaching The Hand Strap Hand Strap Attaching The Hand Strap Belt Clip Installation Belt Clip Installation Kit Aligning The Belt Clip Adaptor Plate For Installation Expansion Port Pistol Grip With Stylus Attaching The Pistol Grip Adaptor/Cable Options 1 RS232 Adaptor Model No. PX3050 Threading Wrist Strap Through Adaptor Micro-USB Adaptor Model No. PX3054 Installation Docking Stations Charging Options Operator Controls Power Consumption ConsiderationsDesktop Docking Station PX3001 10 Back Of Desktop Docking Station Docking Station Charger LED Indicators Charging a Spare BatteryBattery Charge Duration NEO Power LED Does Not Light Up Troubleshooting The Charging Operation Of The DockIndicator Solid Red Indicator Does Not Light When Battery Installed Linking a NEO To An Ethernet Network Network AccessLinking a NEO To a PC Network Addressing Cigarette Lighter Adaptor Model PX3056 Troubleshooting USB OperationsAC Wall Adaptor- Model No. PX3010 11 Automotive Power Adaptor Quad Docking Station PX3004 PC & PX3004 NPC Inserting a NEO In The Quad Docking Station Quad Docking Station Setup Quad Docking Station IndicatorsNetwork Access NEO LED Does Not Light When Docked Battery Charging LED BehaviourTroubleshooting Scanners And Imagers Basic Scanner Operations Scanning Techniques Bluetooth Peripherals Bluetooth printer Bluetooth headset Specifications Page NEO Hand-Held Specifications Hardware Software Wireless Communication Bar Code Applications NEO Radio Specifications 1 802.11b/g Radio Scanner/Imager Specifications 1 SE 955HP Specifications 2 EV15 Imager Specifications 1.1 SE 955HP Decode Zone 2.1 EV15 Imager Decode Zone Page Docking Connector Pinout Appendix a Battery Connector Expansion Port Pinout Wireless Information Appendix B Figure B.1 802.11 Wireless LAN Settings Window Figure B.3 Wireless Information Tab Wireless Information Figure B.4 Network Key and Key Index Name Server Advanced FeaturesAssigning An IP Address Changing Network Properties Rearranging Preferred NetworksDeleting a Preferred Network Page Index Click Data scanner double-click Decode Performance 141 Decode Performance Level Intensity, Keyboard Backlight RSS Code UPC-EANI UPC-EAN 2D UPC Half Block Stitching