Psion Teklogix PX750 manual Double-Click, Show All Modules, Add, Edit, Remove

Chapter 5: Configuration

Manage Triggers

Important: It is not possible to have two or more identical mappings—for example [F1] cannot be mapped to the Non-Decoded Scanner twice—even if the trigger type is different.

A keyboard key that is used as a trigger source will no longer generate key data or perform its normal function. For example, if the space button is used as a trigger source, it will not be able to send space characters to applications.

Double-Click

When a key is pressed and released, then pressed again within the configured time (between 0 to 1000 milliseconds), a double-click occurs. See also “Trigger-Press Type” on page 101.

Show All Modules

By default, the trigger mapping list only shows active mappings. Mappings for drivers or applications that are not currently active are not normally displayed. By checking this checkbox, all mappings, both active and inactive, are displayed.

Add

Tapping this button brings up the Add Mapping dialog (see “Add And Edit Trigger Map- ping” on page 100), so that you can add new trigger mappings.

Edit

Tapping this button brings up the Edit Mapping dialog (see “Add And Edit Trigger Map- ping” on page 100), so that you can edit existing trigger mappings.

Remove

Tapping this button removes an existing mapping.

OK

The OK button in the top right of the Manage Triggers screen saves all changes made. If the cancel button X is tapped instead, or the [ESC] key is pressed, all changes will be discarded.

Psion Teklogix NEO Hand-Held Computer User Manual 99