Psion Teklogix PX750 Code 128 Emulation, 13.3.23Codablock Enable Codablock a, Enable Codablock F

Chapter 5: Configuration

Decoded (ISCP)

Codablock

Code 128 Emulation

When this parameter is enabled, the scanner transmits data from certain Micro PDF-417 symbols as if it was encoded in Code 128 symbols.

If Code 128 Emulation is enabled, the following Micro PDF-417 symbols are transmitted with one of the following prefixes:

]C1 if the first codeword is 903-907, 912, 914, 915 ]C2 if the first codeword is 908 or 909

]C0 if the first codeword is 910 or 911

If Code 128 Emulation is set to off, the Micro PDF-417 symbols are transmitted with one of the following prefixes:

]L3 if the first codeword is 903-907, 912, 914, 915 ]L4 if the first codeword is 908 or 909

]L5 if the first codeword is 910 or 911

Length Restriction

Refer to “Length Restriction” on page 142 for details.

Add/Remove Data

Refer to “Add/Remove Data” on page 142 for details.

5.13.3.23Codablock

Enable Codablock A

Set this parameter to on to enable “Codablock type A”.

Enable Codablock F

Set this parameter to on to enable “Codablock type F”.

Length Restriction

Refer to “Length Restriction” on page 142 for details.

Add/Remove Data

Refer to “Add/Remove Data” on page 142 for details.

Psion Teklogix NEO Hand-Held Computer User Manual 167