Chapter 5: Configuration
Decoded (Internal) Scanners
Add/Remove Data
Refer to “Add/Remove Data” on page 142 for details.
5.13.2.6 EAN 13
Enabled
Set this parameter to on to enable “EAN 13”.
Add/Remove Data
Refer to “Add/Remove Data” on page 142 for details.
5.13.2.7 EAN 8
Enabled
Set this parameter to on to enable “EAN 8”.
EAN-8 Zero Extend
When this parameter is enabled, five leading zeros are added to decoded
Add/Remove Data
Refer to “Add/Remove Data” on page 142 for details.
5.13.2.8 UPC A
Enabled
Set this parameter to on to enable “UPC A”.
UPC-A, Check Digit
If you enable this parameter, the check digit is included with the decoded bar code data.
UPC-A, Preamble
When you
System
Country Code and System
144Psion Teklogix NEO