GS1-128 Identifier, Gtin Compliant | Psion Teklogix PX750 specification

Chapter 5: Configuration

Decoded (ISCP)

GS1-128

“GS1-128” is the GS1 implementation of the Code 128 barcode specification. The former correct name was UCC/EAN-128.

GS1-128 Identifier

“GS1-128 Identifier” allows the AIM ID " ‘ for EAN 128 to be transmitted or removed. By default, this identifier is transmitted if EAN 128 is enabled.

GTIN Compliant

GTIN (global trade item number) processing transmits EAN 128 as the 14-character EAN/UCC GTIN. To use GTIN processing, you must activate the EAN 128 symbology.

Important: When EAN 128 and GTIN processing are both activated, it is not possible to read normal EAN 128 Codes.

FNC1 Conversion

“FNC1 Conversion” allows the FNC1 character to be converted to another character for ap- plications that cannot use the default <GS> Group Separator or hex (1d).

Double-tapping on this option displays a dialog box listing the allowable range: 0 to 255.

Enable ISBT 128

To successfully scan this type of bar code (International Society of Blood Transfusion), this option must be set to on. If you enable this type of bar code, Code 128/EAN 128 is deacti- vated to avoid any confusion.

ISBT Concat Transmit

The codes are not concatenated by default. You need to choose one of the options provided for this parameter to send concatenated code. Choosing Only Concatenated Codes transmits only concatenated codes—single codes will not be transmitted. Choosing Concatenated or Single transmits single codes or concatenated codes. If only one code of a pair is read, that code will be transmitted as a single code. If both codes in a pair are detected, they will be concatenated provided that “ISBT Concat Any Pair” (see below) is enabled.

ISBT Concat Any Pair

Enabling this parameter causes all code pairs that can be, to be concatenated even if they do not comply with Section 4.1 of the “ISBT 128 Bar Code Symbology and Application Speci- fication for Labeling of Whole Blood and Blood Components” (June 2000, Version 1.2.1).

Psion Teklogix NEO Hand-Held Computer User Manual

155

Image 167

Psion Teklogix PX750 GS1-128 Identifier, Gtin Compliant, FNC1 Conversion, Isbt Concat Transmit, Isbt Concat Any Pair

Contents

NEO Hand-Held Computer Copyright 2009 by Psion Teklogix Inc., Mississauga, Ontario Disclaimer Return-To-Factory WarrantyPage Table of Contents Getting To Know NEO Features Of NEO Working With Windows CE Configuration TweakIT Scanner Settings Peripheral Devices & Accessories Specifications Appendix a Pinouts Appendix B Wireless Zero Config Introduction Page Text Conventions About This Manual NEO Hand-Held Computer Features NEO Hand-Held Computer Numeric & Alpha-Numeric Model Variants Connected NEO Standard Features Programming Environment Batch NEO Standard FeaturesPlatform Operating System Internal Expansion Slots Wireless CommunicationsApplication Software Bar Code Applications Accessories Power Management Basic Checkout Page Installing The Battery And Switching The Unit On Switching NEO On And OffBattery Backup Battery Power Calibrating The Touchscreen Wireless NetworkingSwitching The Unit Off Suspend Status Tab Wi-Fi Config Tab Open Authentication Authentication Modes 2.2 EAP WEP Wired Equivalent PrivacyWPA & WPA2 Personal PSK Pre-Shared Key 802.1X, WAP & WAP2 Enterprise And Cckm Encryption Server Certificate Verification Connecting The Wireless Network IP Address Configuring TCP/IP Tap on the IP Information tab Name Server Advanced Tab Data Transfer Between The PC And The Hand-Held Using Microsoft ActiveSyncChecking The Scanner Performing a Cold Reset Resetting NEOUsing Microsoft Vista Performing a Warm Reset Getting to Know NEO Page Front View Features Of NEO Battery Safety Battery Charging Options Removing The Battery PackCharging The Battery Battery Swap Time Switching Off NEO Suspend Switching The Hand-Held On And Off Locking Modifier Keys KeyboardModifier Keys Activating Modifier Keys Keys Function Keys 4 26-Key Keyboard Accessing Alpha KeysFunction Keys And Macro Keys Scan Key Creating Uppercase Letters Choosing a Single Alpha Character Calibrating The Touchscreen Adjusting The Display BacklightDisplay Keyboard Backlight LED Indicator NEO Hand-Held Indicators NEO Scanner LED Behaviour Scan Status Audio Indicators Adjusting The Receiver Volume Onscreen Indicators Windows Start Button Modifier Key IndicatorsBattery Gauge Docking Device Monitoring The Battery And Maximizing Run TimeBattery Charge Radio Signal Quality Storing Batteries Uploading Data In a Docking Station Bluetooth Radio Inserting The Card Pairing a Bluetooth Headset Or Other Bluetooth DeviceMicroSD Card Inserting The Card Caring For The Touchscreen General MaintenanceCleaning NEO Page Working with Windows CE 5.0 Page Navigating In Windows CE Navigating Using a Touchscreen And StylusNavigating Using The Keyboard Space Working With Files, Folders And Programs NEO Startup Desktop Startup Desktop Desktop Icons Taskbar Using The Taskbar Taskbar General Tab Customizing The Taskbar Taskbar Security Tab Taskbar Advanced Tab Start Menu Assigning The Supervisor Security Level Security SettingsDesktop Configuring Security Changing a Password Demo Command PromptPrograms ActiveSync System Tray ShortcutsRemote Connect Windows Explorer Task Manager Cycle Tasks Control Panel Settings Taskbar And Start Menu 6 RunShutdown Network And Dial-Up Connections Suspend Using a Dialog BoxWarm Reset Cold Reset Dialog Boxes Using a Dialog Box CONFIGURATION5 Page Options 136 Page TekTerm Application Control Panel Remote Connect Certificates Control Panel IconsApp Launch Keys Display Error ReportingDate/Time Dialing PC Connection PasswordPower Owner Remove Programs Teklogix Error Handling ServiceTweakIT Settings Volume & Sounds Display Backlight Basic SetupDisplay Properties Dim For IntensityBright For Display Appearance External Power CheckboxKeyboard Properties Key Repeat Repeat Delay Sequence Repeat Rate On For Keyboard Backlight OneShot Keyboard One Shot ModesLock Recording And Saving a Macro OneShot/LockKeyboard Macro Keys Deleting a Macro Executing a Macro Adding And Changing Unicode Values Unicode Mapping Scancode Remapping Removing Unicode Values Adding a Remap Editing a Scancode Remap Virtual Key, Function And Macro Lock Sequence Removing a Remap Volume Icon Volume And Sound Properties Sound Adjustments Volume Adjustments Battery Capacity Power Properties Suspend Timeout Power Saving SuspendPower Source Suspend Threshold Devices Low Power WarningsAdvanced Allow Suspend With Calibration Stylus PropertiesDouble-Tap Touch Manage Triggers Manage Triggers Icon Trigger Mappings Edit Double-ClickShow All Modules Add Trigger Key Add And Edit Trigger Mapping Module Trigger Certificate AssignmentAdd Key Trigger-Press Type Bluetooth Setup Tap on SettingsControl PanelBluetooth icon Devices Tab Pairing a Device Scan Services Set PIN Headset Servers Tab Outgoing Tab Active Conn. Tab Properties Tab Search For Tab Bluetooth Gprs WAN Connection Choose the Make New Connection icon Bluetooth Gprs WAN Connection 115 Bluetooth Gprs WAN Connection Total Recall Profile Information Creating a Backup Profile Add Files Creating a Backup Profile View Selections Perform The Operation Storage ManagerRestoring a Profile Formatting a Memory Card Creating Partitions Type a name for the partition Partition Management 125 12 IPv6 Support Icon IPv6 Support TweakIT Modem Logging Advanced Services SettingsEnable IPv6 Advanced Interface And Network Directional Tabbing, Fit-to-Screen and Focus Rectangle Internet Explorer SettingsFTP Server Sntp Simple Network Time Protocol Server Docking Port Message User Display SettingsUser System Settings User Font Size Registry Editor Error Reporting ErrorLogInfo Teklogix Error Handling Service NetLog Bar Codes Scanner Settings Scanner Restoring Default Settings Options Decoded Internal Scanners Aim Duration Decoded Internal Advanced Options Continuous Scan ModeMinimum Cancel Time Low Power Timeout Linear Security Level Scan Data Format Bi-Direction RedundancyScan Angle Decoded Internal Data Options Transmit Code ID Char Convert To Code Code EnabledEnable Trioptic Code ECI Decoder Full Ascii Set Length L1 And Set Length L2Check Digit Verification Transmit Check Digit Add/Remove Data Decode Perf. LevelLength Restriction Enable Isbt Enable GS1-128/GS1 US EAN-8 Zero Extend 13.2.6 EAN Enabled13.2.7 EAN Enabled UPC a Enabled UPC-E And UPC-E1 Preamble UPC E Enable UPC-EEnable UPC-E1 UPC-E And UPC-E1 Check Digit Supp. Redundancy 13.2.10 UPC/EAN Shared SettingsEnable Bookland EAN Supplementals Codabar Enabled Check Digits MSI Plessey EnabledClsi Editing Notis Editing Check Digit Algorithm Interleaved 2 Enabled Convert To EAN Discrete 2 Enabled Linear Transmission Only Enable CC-C And Enable CC-ABEnable TLC-39 Composite Decoded Iscp Options Laser On Time Decoded Iscp Advanced Options Continuous Scan ModeDecoded Iscp Same Read Validate Same Read TimeoutDiff Read Timeout Code Enable Minimum Length Start/Stop TransmitAccepted Start Char FNC1 Conversion GS1-128GS1-128 Identifier Gtin Compliant Isbn Conversion EAN 13 Settings Enabled Transmit Number System 13.3.6 EAN EnabledUPC E Enabled Addendum Add-on 2 And Addendum Add-on 13.3.9 UPC/EAN Shared SettingsConvert To UPC-A Addendum 159 Set Length L1, Set Length L2, And Set Length L3 Length ModeEnable Plessy Clsi Library System Plessy Minimum Length Plessy Transmit Check Digit Interleaved 2 Enabled Standard 2 of 5 Format Matrix 2 Enabled Format Telepen Enabled13.3.18RSS Code Reduced Space Symbology Enable 13.3.19Composite Enable RSS-14Enable RSS Limited Enable RSS Expanded Enabled Length Restriction 13.3.20TLC-39 Enable Code 128 Emulation 13.3.23Codablock Enable Codablock aEnable Codablock F Click Data Options TabDouble Click Parameters Click Time msec Scan Result Time sec Scan IndicatorSoft Scan Timeout Display Parameters Scan Result Codepage Data Handling Translations Tab Case Rules 173 Page Peripheral Devices & Accessories Page Carrying Accessories Carrying Accessory Model Number Carrying Accessories Hand Strap Attaching The Hand Strap Attaching The Hand Strap Belt Clip Installation Kit Belt Clip Installation Aligning The Belt Clip Adaptor Plate For Installation Pistol Grip With Stylus Expansion Port Attaching The Pistol Grip 1 RS232 Adaptor Model No. PX3050 Adaptor/Cable Options Threading Wrist Strap Through Adaptor Micro-USB Adaptor Model No. PX3054 Charging Options Installation Docking Stations Operator Controls Power Consumption ConsiderationsDesktop Docking Station PX3001 10 Back Of Desktop Docking Station Docking Station Charger LED Indicators Charging a Spare BatteryBattery Charge Duration Indicator Does Not Light When Battery Installed Troubleshooting The Charging Operation Of The DockIndicator Solid Red NEO Power LED Does Not Light Up Network Addressing Network AccessLinking a NEO To a PC Linking a NEO To An Ethernet Network Cigarette Lighter Adaptor Model PX3056 Troubleshooting USB OperationsAC Wall Adaptor- Model No. PX3010 Quad Docking Station PX3004 PC & PX3004 NPC 11 Automotive Power Adaptor Inserting a NEO In The Quad Docking Station Quad Docking Station Setup Quad Docking Station IndicatorsNetwork Access Scanners And Imagers Battery Charging LED BehaviourTroubleshooting NEO LED Does Not Light When Docked Scanning Techniques Basic Scanner Operations Bluetooth printer Bluetooth headset Bluetooth Peripherals Specifications Page Hardware NEO Hand-Held Specifications Software Bar Code Applications Wireless Communication 1 802.11b/g Radio NEO Radio Specifications 1 SE 955HP Specifications Scanner/Imager Specifications 1.1 SE 955HP Decode Zone 2 EV15 Imager Specifications 2.1 EV15 Imager Decode Zone Page Appendix a Docking Connector Pinout Expansion Port Pinout Battery Connector Appendix B Wireless Information Figure B.1 802.11 Wireless LAN Settings Window Figure B.3 Wireless Information Tab Wireless Information Figure B.4 Network Key and Key Index Name Server Advanced FeaturesAssigning An IP Address Changing Network Properties Rearranging Preferred NetworksDeleting a Preferred Network Page Index Click Data scanner double-click Decode Performance 141 Decode Performance Level Intensity, Keyboard Backlight RSS Code UPC-EANI UPC-EAN 2D UPC Half Block Stitching