Psion Teklogix PX750 manual EAN Enabled, Transmit Number System, UPC E Enabled

Chapter 5: Configuration

Decoded (ISCP)

EAN 8

5.13.3.6 EAN 8

Enabled

Set this parameter to on to enable “EAN 8”.

Transmit Check Digit

If the check digit is to be transmitted with the data, this parameter must be enabled.

Convert To EAN 13

If this parameter is enabled, an EAN 8 bar code is converted to EAN 13.

Add/Remove Data

Refer to “Add/Remove Data” on page 142 for details.

5.13.3.7 UPC A

Enabled

Set this parameter to on to enable “UPC A” bar code scanning recognition.

Transmit Check Digit

If the check digit is to be transmitted with the data, this parameter must be enabled.

Transmit Number System

If this parameter is enabled, the number system digit is transmitted with the decoded bar code data.

Convert To EAN 13

If this parameter is enabled, a UPC A bar code is converted to EAN 13.

Add/Remove Data

Refer to “Add/Remove Data” on page 142 for details.

5.13.3.8 UPC E

Enabled

Set this parameter to on to enable “UPC E”.

Enable UPC-E1

Set this parameter to on to allow “UPC-E1” (zero suppressed) bar code scans.

Psion Teklogix NEO Hand-Held Computer User Manual 157