Chapter 3: Getting To Know NEO
Switching The
•Cigarette Lighter Adaptor (Model No. PX3056) when used with a USB/DC Power Adaptor (Model No. PX3054).
•Desktop Docking Station (Model #
•Quad Docking
The charge time required to make the NEO ready for use varies depending on the type of docking station used. A NEO inserted in docking station requires 3 hours to charge the battery to 75% capacity. NEO is equipped with an intelligent charging system that protects the battery from
Note: The specified battery charge times are based on NEO in suspend mode. Additional peripherals and other power consumption features will alter the specified charge time.
Note: Refer to “Monitoring The Battery And Maximizing Run Time” on page 40 for addi- tional information about the battery.
Important: To avoid damaging the battery, the charge process will not begin until the battery temperature is between 0°C to 45°C (32°F to 113°F).
3.3Switching The Hand-Held On And Off
•To switch the unit on, press and hold down the [ENTER] key for at least one second.
•When the LED flashes green, release the [ENTER] key.
The startup screen is displayed.
Note: If NEO is in suspend state, pressing [ENTER] ‘wakes’ the unit from this state. The screen in which you were working before the computer entered suspend state is displayed.
Switching Off NEO (Suspend)
Important: Keep in mind that turning off NEO does not result in a complete reboot; rather, the unit enters a
30Psion Teklogix NEO