Chapter 6: Peripheral Devices & Accessories
Belt Clip Installation
•Pull up the velcro clasp to adjust the hand strap to fit your hand as required.
6 | Stylus Holder |
|
Note: In addition to the hand strap, the lanyard with quick release buckle is also used to attach the wrist strap (shipped with the
6.1.2Belt Clip Installation
Figure 6.4 Belt Clip Installation Kit
Belt Clip
Adaptor Plate
Screw M2 x 6
Belt Clip attached here Metal Eyelet
Foam Pad under | Metal Insert | |
On NEO Unit | ||
Folded End | ||
|
•Position the belt clip adaptor plate so that the thicker, folded end aligns with the angled scanner section on the back of NEO as illustrated in Figure 6.5.
180Psion Teklogix NEO