Chapter 5: Configuration

Options Tab

5.13.4 Options Tab

This tab allows you to tailor the double-click parameters and the display options associated with your scanner.

5.13.4.1 Double Click Parameters

Click Time (msec)

This parameter controls the maximum gap time (in milliseconds) for a double-click. If the time between the first and second clicks of the scanner trigger is within this time, it is con- sidered a double-click. The allowable range is 0 to 1000. A value of zero disables this feature.

A double-click produces different results depending on whether or not a value is assigned in the “Click Data” parameter. When a value is not assigned for the “Click Data”, double-click- ing the scanner trigger overrides the target dot delay set in the “Dot Time” parameter and initiates a normal scan sweep. If a value is assigned for the “Click Data” parameter, double- clicking the scanner trigger inserts the “Click Data” value rather than initiating a scan.

Click Data

This parameter determines which character is sent to the application installed in your NEO following a double-click. A dialog box appears, asking that you press the key you want to insert. The ASCII/Unicode key value of the keypress is displayed.

168Psion Teklogix NEO Hand-Held Computer User Manual

Page 180
Image 180
Psion Teklogix PX750 manual Options Tab, Double Click Parameters Click Time msec, Click Data