Psion Teklogix PX750 manual Certificate Assignment, Add Key, Trigger-Press Type, Module Trigger

Chapter 5: Configuration

Certificate Assignment

Add Key

Only existing trigger sources are shown in the Source combo-box. To add a new source to this list, tap on the Add Key button. A dialog will pop up and allow you to select the key- board key to use as a trigger source.

Trigger-Press Type

You can enable either an Up/Down or Double Click response to a trigger press. Normally, when a trigger (keyboard key, etc.) is pressed and released, a “trigger down” event is sent to the “owner”– that is, the application receiving the trigger press information—followed by a “trigger up”. If Double Click is chosen in this menu, when the trigger is pressed, released, and then pressed again, a “double-click” event will have occurred. If a mapping with the type Up/Down has also been configured for the same source, it will only receive the first set of trigger events.

Module Trigger

This identifies the driver or application receiving the trigger presses.

Show All Modules

By default, inactive owners are not shown. By checking this checkbox, all owners, both active and inactive, are displayed.

5.5.7Certificate Assignment

•In the Control Panel, choose the Certificate icon.

Psion Teklogix NEO Hand-Held Computer User Manual 101