![BURNERS AND GRIDS](/images/new-backgrounds/57472/5747241x1.webp)
BURNERS AND GRIDS
✓These parts can be removed and cleaned with appropriate products.
✓After cleaning, the burners and their flame spreaders must be well dried and correctly replaced.
✓It is very important to check that the burner flame spreader and the cap have been cor- rectly positioned. Failure to do so can cause serious problems.
✓Check that the electrode “S” (figs. 23 and 26 ) is always clean to ensure
✓Check that the probe “T” (figs. 23 and 26) next to each burner is always clean to ensure correct operation of the safety valves.
✓Both the probe and ignition plug must be very carefully cleaned.
✓Note: To avoid damage to the electric ignition do not use it when the burners are not in place.
Figure 23
C
F
|
|
|
|
|
|
|
|
|
|
Ignitor | "S" | Flame failure | ||
|
| probe "T" |
21