DeLonghi DEDW645W, DEDW645S Damage to glassware and other dishes, Before Startingthe Dishwasher

Using Your Dishwasher

Using Your Dishwasher

Cutlery Basket

Cutlery should be placed in the cutlery rack separately from each other in the appropriate positions shown below. Make sure the utensils do not nest together, this may cause bad performance.

For a top quality clean, place the silverware in the basket making sure that:

ŸThey do not nest together.

ŸSilverware is placed with the male face up.

ŸLong utensils in the middle.

IN

4	5
3
1	2
2	1
5	3
	4

1 Forks

2 Soup spoons

3 Dessert spoons

4 Teaspoons

5 Knives

Damage to glassware and other dishes

Possible Causes

ŸType of glass or manufacturing process. Chemical composition of detergent.

ŸWater temperature and duration of dishwasher program.

Suggested remedy:

ŸUse glassware or porcelain dishes that have been marked dishwasher-proof by the manufacturer

ŸUse a mild detergent that is described as kind of dishes If necessary, seek further information from detergent manufacturers.

ŸSelect a program with as low a temperature.

ŸTo prevent damage, take glass and cutlery out of the dishwasher as soon as possible after the program has ended. as possible after the program has ended.

BEFORE STARTINGTHE DISHWASHER

The following things should be checked before starting the dishwasher:

1.That the dishwasher is level and fixed properly.

2.That the inlet valve is open .

3.There is no leakage at the connections of the conducts.

4.The wires are tightly connected.

5.The power is switched on.

6.The inlet and drain hoses are not knotted or kinked.

7.All packing & print materials should be taken out of the dishwasher.

PRIORTO USING FORTHE FIRSTTIME

Before using your dishwasher for the first time:

Fill the Rinse Aid Dispenser

The rinse aid is released during the final rinse to prevent water from forming droplets on your dishes, which can leave spots and streaks. It also improves drying by allowing water to roll off the dishes. Your dishwasher is designed to use liquid rinse aids. The rinse aid dispenser is located inside the door next to the detergent dispenser. To fill the dispenser, open the cap and pour the rinse aid into the dispenser until the level indicator turns completely black. The volume of the rinse aid container is about 110ml.

Function of the Rinse Aid

Rinse aid is automatically added during the last rinse, ensuring thorough rinsing, and spot and streak free drying.

WARNING!

Only use branded rinse aid for dishwashers. Never fill the rinse aid dispenser with any other substances (e.g. Dishwasher cleaning agent, liquid detergent). This would damage the appliance.

When to refill the Rinse Aid Dispenser

If there is no rinse-aid warning light in the control panel, you can judge the amount of rinse-aid by the colour of the optical level indicator "C" located next to the cap. When the rinse-aid container is full, the whole indicator will be dark. As the rinse-aid diminishes, the size of the dark dot decreases. You should never let the rinse aid get below 1/4 full.

As the rinse aid diminishes, the size of the black dot on the rinse aid level indicator changes, as illustrated below.

Full

3/4 Full

1/2 Full

1/4 Full (Should refill to eliminate spotting)

Empty

C (Rinse-Aid indicator)

Page 18 Page 11