APPENDIX C
Print outs
Result Printout
Examples of result printouts showing the measured values, the Measurement Id and the number of measurements with this id, the number of measurements used to calculate the mean value, the date and time the measurement was taken, the number of data in the data log, the measurement status and the instrument serial number.
Note that one or more of the shown data can be left out depending on the selected operation mode.
If the status is other than 0 then there was a special condition detected during the measurement and this will also be printed.
Rl Calibration Printout
The printout after a Rl Calibration measurement showing the selected Rl Normal value. The date and time for the calibration and the status for the measurement.
Qd Calibration Printout
The printout after a Qd Calibration measurement showing the selected Qd Normal value, the date and time for the calibration and the status for the measurement.
DELTA | LTL2000S(Q) Retroreflectometer | 37 |
