Delta LTL2000S manual Command Parameter Response

Command set

Command	Parameter	Response
TO	None	Sensor Off
VAn	None	VBat Alarm: 11.00 Volt
	11.50	VBat Alarm: 11.50 Volt
VB	None	VBat = 12.77 Volt
VS	None	VBat Lamp Off: 12.78 Volt
		VBat Rl Lamp On : 11.99 Volt
		VBat Qd Lamp On : 12.09 Volt

Meaning

Turn sensor off (power off)

Set point for low bat warning New set point for low bat warning Measure actual voltage on lead-acid battery Measured VBat with min. load Measured VBat with Rl. lamp load Measured VBat with Qd lamp load

<?>

None

Help menu.

DA [yyyy mm dd] DPS x-stat

FV Firmware Version

ID ID

IIInit [Y/N] LC Log Clr LE Log , sep LS Log stat

LWn Log warn [T/F] OT Off timer

PV PMTV QEn Qd[T/F] QCn Cal to n REn Rl [T/F] RCn Calc to n RZ zero

M Measure SNn Seq # TI [hh:mm:ss] TO Turn Off VA Bat alarm VB VBat

VS V-idle V-lamp

Query/Set Real Time Watch Date year/month/date Query instrument status

Query Firm Ware info Instrument S/N

Enable/Execute Instrument Initialisation Clear Log Data

Send Log Data in comma seperated form Query Data Log Status

Enable/Disable the Display of Log full warning [T/F] Query/Set the Automatic Turn Off Timer

Read PMT Voltage Enable/Disable Qd function Calibrate Qd to n Enable/disable Rl Function Calibrate Rl to n

Zero adjust Rl measurement Execute enabled measurements Query/Set Sequence ID Query/Set Time

Turn instrument Off

Query/Set Alarm for Low VBAT Query Battery voltage

Query Voltage conditions

DELTA LTL2000S(Q) Retroreflectometer 35