WRENCH AND BLADE STORAGE
A convenient wrench and blade holder (A) Fig. 13, is supplied on the left side of the rear casting, which allows you to store the hex wrenches (C), quickset blade changing wrench (B) and extra scroll saw blades when not in use.
CHANGING BLADES
1.DISCONNECT MACHINE FROM POWER SOURCE.
2.Remove table insert.
3.Position blade tension lever (A) Fig. 19, in the vertical position to release blade tension.
4.Insert long end (A) Fig. 14, of quickset blade changing wrench into hole (B) in upper blade holder. This will align wrench (C) with blade holder screw (D).
5.Fig. 15, illustrates the quickset blade changing wrench (E) engaged with the upper blade holder assembly. Turn wrench counterclockwise to loosen screw (D) and remove blade (F) from upper blade holder as shown.
B
C
A
Fig. 13
B
A
D 
C
Fig. 14
DE
F 
Fig. 15
8
