Denon ASD-51W Connection to devices equipped with Dock Control

ENGLISH

Getting	Connection to devices equipped with Dock Control
	The ASD-51W can be operated remotely using the supplied remote control. By connecting to your existing
Started	equipment, you can play back your favourite music and video files from your iPod or from over a network.
		Device equipped with DOCK CONTROL jack						Monitor
Connections	AC outlet (wall)	"6%*0			"6%*0		7*%&0	7*%&0
		$0"9*"-	3&.05&	%0$,	"6%*0		4 7*%&0	4 7*%&0
		*/	$0/530-	$0/530-		*/	*/	*/
					3	-
PlaybackSetting	AC 120 V, 60 Hz	b2	b3	b4	R	L		or
	(For U.S.A. &	separately)(sold	separately)(sold			(supplied)
								to the terminal on the ASD-
	Canada model)
	AC 230 V, 50 Hz							NOTE
	(For Europe model)
								Connect the plug on the side
								to which this part is mounted
Information						R	L	51W.
	b1
Troubleshooting
	(supplied)	Signal	Audio signal					Video signal
Specifications	direction		OUT		IN		OUT	IN
	NOTE
	• When the DOCK CONTROL jack is			connected,	• Only connect equipment which is compatible with
	the ASD-51W no longer accepts remote control					the DOCK CONTROL jack to the DOCK CONTROL
	commands.To use the remote control unit, point it at					jack of the ASD-51W. Connecting non-compatible
	the remote control sensor on the connected device					equipment will result in a malfunction.
	when operating it.

b1: After inserting the AC adapter plug into the wall socket, turn the power operation switch on the side panel to “ON/STANDBY” to power up the ASD-51W. The power indicator then lights up, and after 15-20 seconds the GUI screen is displayed on the monitor.

b2: Digital connection is possible using a commercially available coaxial digital cable. When using the digital output, you will need to perform settings in the GUI menu “Setup” – “Other” – “Audio Output” (vpage 18). The default setting is “Analog”. Digital output is turned off.

NOTE

When making a digital connection to a DENON amplifier released in 2009 or earlier, you should not use the DOCK CONTROL jack.

b3: Please use a commercially available monaural mini-plug cable for the connection. Connect to equipment that has a REMOTE CONTROL jack. The ASD-51W receives remote control signals from the connected equipment, and these signals are sent to the equipment to operate it.

b4: ASD-51W can be operated from a DENON amplifier or DENON system device equipped with a DOCK CONTROL jack connected to the ASD- 51W.

Features may be limited, depending on the device connected.

NOTE

When using the DOCK CONTROL jack, be sure to make an analog connection.

Latest compatible lists

http://denon.com/asd-51/