Denon ASD-51W ENTER, ENTER, ENTER, ENTER, ENTER, ENTER, ENTER

Setting items					Setting contents
Network Setup			y Use uio p to input the proxy server port number
(Continued)			and press ENTER.
			u Use i to select “Exit” and press ENTER.
			Setup is complete.
			n Wireless LAN settings
When	searching
access	points		1. Fitting a rod antenna (vpage 7).
to	connect		b If a LAN cable is connected, remove it.
			2. Turn on the ASD-51W (vpage 4, 6 b1 ).
automatically, refer to
“Automatic settings”.			3. Set the access point at the GUI menu “Setup”
When	searching		– “Network” – “Network Setup”.
access	points	to			Automatic settings
connect	manually,
refer to	“Manual			Network Setup
settings”.
If the	device	is	Search			q
connected to a router			WPS
			Manual
with a WPS function,					Search
please refer to “WPS
					Search
settings”.
					SSID_1		90%	WEP
					SSID_2		75%	WEP
				Up/Down	SSID_3		50%	WEP
					Back/Select		30%	None
					SSID_4
					SSID_5		10%	None w
						Up/Down	Back/Select

q Select “Search” and press ENTER.

The access point you have set is displayed.

bIf your preferred access point is not found, repeat step q.

				ENGLISH
		Making Detailed Settings (Setup)			Getting
Setting items		Setting contents
Network Setup	w Use ui to select the access point, and then press				Started
(Continued)	ENTER.
	b If the access point is not detected automatically,
		use the “Manual settings” procedure (vpage			Connections
	15).
	b If the access points are repeat search, use i to
		select the “Search” and press ENTER.
	e If there is an encryption setting for the access point
	you selected in step w, enter same encryption key
	as used for the access point. (If there is no encryption				Setting
	setting, proceed to step r.
	• Use uio pto input the “Key” (encryption key) and
	press ENTER. Enter the same encryption key as used
	for the access point.				Playback
	The types of characters that can be input are as shown
	below.
		GLower case charactersH	a ~ z
		GUpper case charactersH	A ~ Z		Information
		GSymbolsH ! “ # % & ’ ( ) * + , - . / : ; < = > ? @ [
		\ ] _ (Space)
		GNumbersH 0 ~ 9
	b When no security settings have been used in
		the Internet connection settings, this step is not			Troubleshooting
		necessary.
	b When connecting to a “WEP” encrypted network,
		set the access point “Default Key” to “1”.
	r Use i to select “Connection” and press ENTER.
	Network connection starts.
	b ASD-51W performs automatic network setup due to
	the DHCP function.				Specifications
	– step 3 – e).
	When connecting to a network that has no DHCP
	function, perform the setting in step 4.
	4. Set the IP address (vpage 11 “Wired LAN settings”
			See overleaf

13