ENGLISH

Setting items

 

Setting contents

Party Mode

 

ON : Enable Party Mode function.

Function

 

OFF : Disable Party Mode function.

Set the Party Mode

Refer to page 30, “Playing the Same Network

function.

 

 

Audio on Different Devices Connected in a Network

 

 

 

 

 

 

(Party Mode Function)” for more information on the party

 

 

 

mode function.

Party Start Level

 

Volume Level

Make

settings

for

• 0 ~ 100 % : Start party mode with your preferred volume.

volume

level when

This can be set when “Party Mode Function“ is set

the Party Mode

is

to “ON“.

started.

 

 

 

Firmware Update

Check for Update : You can update to the latest firmware

Update the firmware.

by connecting the ASD-51W to a network.

 

 

 

It is recommended that you update to the latest firmware

 

 

 

version when using the ASD-51W.

NOTE

When you update the firmware your settings will be returned to the default values. Please be aware that updating the firmware will erase all your settings, including the stations registered in your Favourites and your Recently Played list.

GHow to update the firmwareH

1. Connect the monitor and connect to the network. (vpage 6)

2. Turn on the ASD-51W (vpage 4, 6 b1 ).

3. Configure the network connection settings. (vpage 7)

 

Making Detailed Settings (Setup)

 

 

Setting items

Setting contents

Firmware Update

4. While watching the GUI screen, use uio p to

(Continued)

select “Setup” – “Other” – “Firmware Update”.

 

b When the language setting is “English”.

5. Select “Start” and press ENTER.

•When you press ENTER, firmware updating starts automatically.

•The message “Now Updating. During this process screen will go blank for several minutes. Do not turn off.” will appear briefly, after which the GUI screen will go blank.

•During firmware updating, the power indicator is turned off and the GUI screen is blank.

•The updating process takes approx. 10 ~ 15 minutes with a broadband connection. The actual time will vary depending on the server status and the speed of the Internet.

•When updating is complete, the GUI screen reappears automatically.

•Set the power operation switch on the ASD-51W to “OFF”. Firmware updating is now complete.

NOTE

Step 5 cannot take place if the ASD-51W does not connect to the Internet. In this case, repeat the procedure from step 2.

If your ASD-51W already has the latest firmware version, the message “Latest Firmware” will appear at step 5. In this case, you do not need to update the firmware.

Specifications Troubleshooting Information Playback Setting Connections Started Getting

17