Denon ASD-51W Troubleshooting, GGeneralH, GRemote Control UnitH

ENGLISH

Specifications Troubleshooting Information Playback Setting Connections Started Getting

Troubleshooting

If a problem should arise, first check the following:

1.Are the connections correct?

2.Is the set being operated as described in the owner’s manual?

3.Are the other components operating properly?

If this unit does not operate properly, check the items listed in the table below. Should the problem persist, there may be a malfunction. In this case, disconnect the power immediately and contact your store of purchase.

GGeneralH

Symptom	Cause	Countermeasure	Page
No sound is produced.	• The iPod is not playing.	• Check that the iPod is playing.	–
No image appears on the	• The iPod is not properly connected to the ASD-51W.	• Check that the iPod is properly connected to the ASD-	–
monitor.		51W’s dock connector.	6
	• The AC adapter is not connected to the ASD-51W or a	• Check the connections.
	power outlet. Or the power operation switch on the ASD-	Set the power operation switch on the ASD-51W to “ON/	4
	51W is not set to “ON/STANDBY”.	STANDBY”.	6
	• The AV/Control cable is not properly connected.
	• The monitor’s input selection is not properly set.	• Check the connections.	–
		• Set the monitor’s input selector to the proper position for
		the connected video input terminal.

GRemote Control UnitH

Symptom	Cause	Countermeasure	Page
Set does not work	• Battery are worn.	• Replace with new battery.	3
properly when remote	• You are operating outside of the specified range.	• Operate within the specified range.	3
control unit operated.	• Obstacle between main unit and remote control unit.	• Remove the obstacle.	3
	• The battery are not inserted in the proper direction,	• Insert the battery in the proper direction, following the	3
	as indicated by the polarity marks in the battery	polarity marks in the battery compartment.
	compartment.		3
	• The set’s remote control sensor is exposed to strong light	• Move the set to a place in which the remote control sensor
	(direct sunlight, inverter type fluorescent bulb light, etc.).	will not be exposed to strong light.	6
	• A mini-plug cable is connected to the REMOTE CONTROL	• Remove the mini-plug cable from the REMOTE CONTROL
	jack.	jack.

34