Making Detailed Settings (Setup)

For details on how to select, set and cancel settings for each menu, see “GUI Menu Operation” (vpage 9, 10).

nItems that can be set with the “Setup” procedure
Making the network

Making language settings

settings (Network)
(Language)

vpage 15

n Wired LAN settings

 

 

vpage 11

 

 

n Wireless LAN settings

Making the GUI settings

Automatic settings

(GUI)

vpage 16

vpage 13

WPS settings

vpage 14

Making other settings

Manual settings

vpage 15

(Other)

vpage 16

Making the Network Settings (Network)

Default settings are underlined.

Make network settings.

Setting items

Setting contents

 

 

 

 

Network Setup

 

 

n Wired LAN settings

 

Make

settings for

 

wired

or wireless

1. Connect the LAN cable (vpage 7).

 

LAN.

 

2. Turn on the ASD-51W (vpage 4, 6 b1 ).

 

ASD-51W performs automatic network setup due to the DHCP function.

When connecting to a network that has no DHCP function, perform the setting in step 3.

3. Set the IP address at the GUI menu “Setup”

– “Network” – “Network Setup”.

ENGLISH

 

 

 

 

 

 

 

 

 

Making Detailed Settings (Setup)

 

Getting

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Setting items

 

 

 

 

Setting contents

 

 

 

Network Setup

 

 

 

 

 

 

 

 

 

Network Setup

 

 

 

 

Started

(Continued)

 

 

 

 

 

 

 

 

 

 

 

 

DHCP

ON

 

 

 

 

 

 

 

 

 

IP Address

192.168.11.3

 

 

 

• If you are using a

Exit

 

 

 

 

 

Detail

 

 

 

 

Connections

 

broadband

router

Detail

w

 

 

 

 

 

 

 

 

 

(DHCP

function),

 

q

 

 

 

 

 

DHCP

OFF

 

 

 

there is no need to

Up/Down

IP Address

192.168.011.003

 

 

 

make the settings

Back/Select

255.255.255.0.

 

 

 

 

 

 

Subnet Mask

 

 

 

at

“IP

Address”

 

 

 

Default Gateway

000.000.000.000

 

 

 

 

 

 

Primary DNS

000.000.000.000

 

 

 

 

and “Proxy”, since

 

 

 

Secondary DNS

000.000.000.000

 

 

Setting

 

the DHCP function

 

 

 

Proxy

 

 

 

 

 

 

 

 

e

 

 

 

is set to “ON” in

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Up/Down

Back/Select

 

 

 

the

ASD-51W’s

 

 

 

 

 

 

 

 

 

 

 

 

default settings.

 

 

 

 

 

 

 

Playback

q Select “Detail” and press ENTER.

 

 

 

• If

the

ASD-51W

 

 

 

 

is

being

used

w Use p to set “DHCP” to “OFF”, then press i.

 

connected

to

a

The DHCP function is disabled.

 

 

 

 

 

 

 

 

 

network

 

without

e Use uiop to input the address and press ENTER.

Information

 

the DHCP function,

• IP Address : Set the IP address within the ranges

 

the

 

 

network

shown below. The Network Audio function cannot be

 

settings

must

be

used if other IP addresses are set.

 

 

 

 

made. In this case,

CLASS A : 10.0.0.0 ~ 10.255.255.255

 

some knowledge

CLASS B : 172.16.0.0 ~ 172.31.255.255

Troubleshooting

 

of

networks

is

CLASS C : 192.168.0.0 ~ 192.168.255.255

 

required.

 

 

For

• Subnet Mask : When connecting an xDSL modem or

 

details,

 

consult

terminal adapter directly to the ASD-51W, input the

 

a

 

 

network

subnet mask indicated in the documentation supplied

 

administrator.

 

by your provider. Normally input 255.255.255.0.

 

 

 

 

 

 

• Default Gateway : When connected to a gateway

 

 

 

 

 

 

 

 

 

 

 

 

 

(router), input its IP address.

 

 

 

Specifications

 

 

 

 

 

 

 

 

DHCP (Dynamic Host Configuration Protocol)

 

 

 

 

 

 

 

 

 

 

 

These are systems by which the IP address and other network settings are

automatically set for the ASD-51W, computer, broadband router and network

devices.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

See overleaf

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

11