Denon AVR-1082 manual Surround parameters q Pro Logic II Mode, Panorama Control, Dimension Control

ENGLISH

3	Set the surround parameter mode.
	SURROUND	Display
	PARAMETER
	SURR.
	PARA.	MODE CINEMA

(Main unit) (Remote control unit)

The on-screen display differs according to whether the operation is performed from the main unit or the remote control unit.

4	Select the play mode.		TUNING
	SELECT
		BAND	MODE
			TUNING
	(Main unit)	(Remote control unit)
	Display
	MODE CINEMA	MODE MUSIC		MODE PRO LOGIC
5	Select the various parameters. (See “Surround parameters q” for a description of the various parameters.)

Surround parameters q

Pro Logic II Mode:

The Cinema mode is for use with stereo television shows and all programs encoded in Dolby Surround. The Music mode is recommended as the standard mode for autosound music systems (no video), and is optional for A/V systems.

The Pro Logic mode offers the same robust surround processing as original Pro Logic in case the source contents is not of optimum quality.

Select one of the modes (“Cinema”, “Music” or “Pro Logic”).

Panorama Control:

This mode extends the front stereo image to include the surround speakers for an exciting “wraparound” effect with side wall imaging.

Select “OFF” or “ON”.

Dimension Control:

This control gradually adjust the soundfield either towards the front or towards the rear. The control can be set in 7 steps from o to 6.

Center Width Control:

This control adjust the center image so it may be heard only from the center speaker; only from the left/right speakers as a phontom image; or from all three front speakers to varying degrees.

The control can be set in 8 steps from 0 to 7.

Dolby Digital mode (only with digital input) and DTS Surround mode (only with digital input)

SURROUND	TUNING
PARAMETER
	BAND	MODE
	TUNING
(Main unit)	(Remote control unit)
MODE CINEMA	MODE MUSIC	MODE PRO LOGIC
CINEMA EQ	PANORAMA	CINEMA EQ
	DIMENSION
	CENTER WIDTH

When set with the on-screen display using the remote control unit while in the MUSIC mode, set the “ ” mark to “OPTION 0” using the D and H cursor buttons, then press the F cursor button.

Press the ENTER button to return to the previous screen.

1	Select the input source.
	Playback with digital input

q Select an input source set to digital (COAXIAL/OPTICAL) (see page 14).

FUNCTION

VDP

5

(Main unit) (Remote control unit)

wSet the input mode to “AUTO” or “DTS”.

AUTO	DTS
	MODE

1 3

B

3	1	2 4,5	2,6
		POWER
	OFF	ON /
		SOURCE
		RC-884
		REMOTE CONTROL UNIT

6	Set the various surround parameters.
	SELECT		TUNING
		BAND	MODE
			TUNING
	(Main unit)	(Remote control unit)

7	When the surround parameters are set using
	the buttons on the main unit, stop operating

buttons after completing the settings. The settings are automatically finalized and the normal display reappears after several seconds.

When the settings are made using the buttons on the remote control unit, press the SURR. PARA. button to finish.

NOTE:

•There are four Dolby Surround Pro Logic modes (NORMAL, PHANTOM, WIDE and 3 STEREO). The AVR-3802 sets the mode automatically according to the types of speakers set during the system setup process (page 10).

(Main unit)(Remote control unit)

2	DOLBY/DTS	Select	the	Dolby/DTS
	SURROUND	Surround mode.

(Remote control unit)

When performing this operation from the main unit’s panel, press the SURROUND MODE button, then turn the SELECT knob and select Dolby Pro logic or DTS NEO:6.

SURROUND	SELECT
MODE

(Main unit) (Remote control unit)

	TV	CD	CDR/MD/ TAPE RECEIVER
	VCR	DBS/CABLE		VDP	DVD
4	DISPLAY			MENU
	SURR.				OSD
	PARA.
	SETUP				RETURN
5, 6			TUNING		A/B
					MEMORY
		BAND		MODE
	CHANNEL				VOLUME
	+		TUNING		+
	SKIP		ENTER
	-		SHIFT		-
	SKIP		MUTING
	TUNER		PHONO		CD
	1		2		3
1	CDR/TAPE		VDP		DVD
	4		5		6
	VCR-1	VCR-2/V.AUX			TV/DBS
	7		8		9
	TV/		0		+10
	VCR
	RDS		PTY		RT
	TEST		SPEAKER		OUTPUT
	TONE
2		SURROUND
	DOLBY/DTS		DSP		5CH / 7CH
	SURROUND		SIMU.		STEREO
3	6.1 / 7.1		DIRECT		STEREO
	SURROUND
1			INPUT
	MODE		ANALOG		EXT.IN
		SYSTEM CALL
	CALL 1		CALL 2		BACKLIGHT

28