Denon AVR-2308CI Speaker Connections, Speaker Connections, Speaker Installation

ENGLISH

Getting	Speaker Connections
Started	Speaker Installation
Connections	The illustration below shows a basic example of installation of the amplifier combined with 8 speakers and
	a monitor.								Surround back speakers
		Subwoofer				Center speaker
Setup
Playback
Control Remote	Front speakers
-Multi
	sides of the monitor or screen and
	Place the front	speakers to	the			Surround speakers
Zone
	as flush with the screen surface as
Information	possible.
	The table below shows a typical speaker configuration for the AVR-2308CI.
Troubleshooting		FRONT		CENTER	SURROUND		SURROUND BACK			SUBWOOFER
		L	R		L	R	L	R	1 only
	7.1-channels	S	S	S	S	S	S	S	–	S
	(FRONT A+B)
	7.1-channels	S	S	S	S	S	S	S	–	S
	6.1-channels	S	S	S	S	S	–	–	S	S
	5.1-channels	S	S	S	S	S	–	–	–	S
	3.1-channels	S	S	S	–	–	–	–	–	S
	2.1-channels	S	S	–	–	–	–	–	–	S
	2-channels	S	S	–	–	–	–	–	–	–

Speaker Connections

Example: 5.1-channels (FRONT A+B) and ZONE2 use
Front speakers		Front speakers
	A	B	Subwoofer	Center speaker
				Subwoofer
				with built-in
(L)	(R)	(L)	(R)	amplifier
w q	w q	w q w	q	w q
			*/

b L : Left

R : Right

(L)	(R)	(L)	(R)
w q w	q	w q w	q

Surround speakers	ZONE2 speakers
		ZONE2

When using just one surround back speaker, connect it to the left channel (SBL).

NOTE

By default, the AVR-2308CI’s “Amp Assign” setting is set to “ZONE2”. To use as the surround back speaker for the main zone, change the “Amp Assign” setting (vpage 30).