ENGLISH

Getting

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Started

 

Auto Setup

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Connections

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

• This function provides the optimum listening environment for all

 

 

 

• This procedure lets you measure the acoustic properties of your

 

 

 

speakers and listening room and make the optimum settings

 

 

 

automatically.

 

 

 

 

 

 

 

 

 

 

listening positions in a home theater where several people view or

 

Setup

 

 

 

listen to the video or audio source simultaneously.

 

 

 

 

 

 

The measurements are performed by moving the setup microphone

 

Playback

 

successively to the different positions where the family members

 

 

sit within the listening area surrounded by the speakers, as

 

 

 

 

 

 

shown in Example q. For better results, we recommend making

 

Remote

 

measurements in 6 or more positions.

 

 

 

 

 

 

 

 

 

Even if the home theater is only used by a small number of persons

 

 

as shown in Example w, measuring at points around the listening

 

 

 

 

Control

 

position results in more effective correction.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Example q

Example w

 

 

 

 

 

 

 

 

 

Zone-Multi

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(

 

:Measuring positions)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Information

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

*

M

 

 

 

 

 

 

 

 

*M

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Troubleshooting

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

About the main listening position (*M)

 

 

 

 

 

 

 

 

 

 

 

The main listening position refers to the center of the listening

 

 

 

position, or the place where you would sit to watch or listen when

 

 

 

alone.

 

 

 

 

 

 

 

 

 

 

This position is used as the basis when measuring the distance of

 

 

 

the speakers.

 

 

 

 

 

 

 

 

To set the listening environment manually to suit your tastes, see page 26, 27.

Preparations

1Connect the included setup microphone to the SETUPMIC jack on the main unit.

The “Auto Setup” screen appears automatically.

Sound receptor

2Mount the setup microphone on a camera tripod, etc., and set it at the main listening position, with the sound receptor pointing towards the ceiling.

Setup microphone

b Adjust the height of the setup microphone’s sound receptor so that it is at the height of the ears when listening.

When using a subwoofer with a setting function, make the following settings before starting the auto setup procedure:

•Volume: “Center”

•Crossover frequency: “Maximum”

•Low pass filter: “Off”

•Standby mode: “Off”

NOTE

•Do not disconnect the setup microphone until the auto setup procedure is completed.

•When using headphones, unplug the headphones before starting the auto setup procedure.

23