Denon AVR-2308CI Connecting the Monitor, Connecting the Playback Components, DVD Player

Connecting the Monitor

•Connect the cables to be used (vpage 8 “Video Conversion Function”).

•With HDMI connections, the video and audio signals can be transferred with a single cable.

•To output the audio signals to the monitor with HDMI connections, set menu “Manual Setup” – “HDMI Setup” – “HDMI Audio Setup” to “TV” (vpage 27).

Monitor

			7*%&0
)%.*	7*%&0	4 7*%&0		$0.10/&/5 7*%&0
*/	*/	*/		*/
				: 1# 13

NOTE

•The component video connectors may be indicated differently on your monitor. For details, see the monitor’s operating instructions.

•No audio signals are output from the HDMI monitor output connector.To play the sound by monitor, make analog or digital audio output connections to monitor’s audio input connectors.

•The audio signals output from the HDMI connectors are only the HDMI input signals. Video-converted HDMI signals are not included in the audio signals.

ENGLISH

Connecting the Playback Components							Getting
Carefully check the left (L) and right (R) channels and the inputs and outputs, and be sure to interconnect
correctly.							Started
DVD Player
							Connections
• Connect the cables to be used.
• With HDMI connections, the video and audio signals can be transferred with a single cable.
DVD player
		7*%&0				"6%*0	Setup
)%.*	7*%&0	4 7*%&0 $0.10/&/5 7*%&0		"6%*0		$0"9*"-
065	065	065	065	065		065
		:	1# 13	-	3
				L	R		Playback
							Remote
				L	R		Control
							Zone-Multi
							Information
							Troubleshooting

•Connect an HDP (High-Definition Player) in the same way.

•When using an optical cable for the digital audio connection, make the settings at menu “Input Setup”

– “Assign” – “Digital In” (vpage 35).

12