Denon AVR-3300 manual Display switches as follows each Time the button is pressed, Volume level

ENGLISH

[2]Outputting a program source to an amplifier, etc., in a different room (MULTI mode)

This operation is possible when “6CH IN & MULTI” is selected at the System Setup Menus “EXT. IN & MULTI” setting screen. This operation is not possible in the “8CH IN” mode.

1	Press the REC/MULTI button.	REC/
		MULTI
	The display switches as follows each
	time the button is pressed.
		(Main unit)
2	With “M-SOURCE SOURCE” displayed,	FUNCTION
	turn the FUNCTION knob and select the

source you wish to output.

•The “MULTI” indicator and the indicator of the selected source light.

		(Main unit)
3	Start playing the source to be output.
	• For operating instructions, refer to	the manuals of the
	respective components.
4	To cancel, either press the REC/MULTI button or turn the
	function knob and select “SOURCE”.
	• When “SOURCE” is selected, the “MULTI” indicator turns
	off.
	REC/	FUNCTION
	MULTI
	or
	(Main unit)	(Main unit)

	SYSTEM		SURROUND
TUNING	SETUP		PARAMETER
BAND	TITLE		MENU/GUIDE
		CH SELECT
MODE		ENTER
		SELECT
MEMORY	STATUS		ON SCREEN
	DISPLAY		RETURN
USE/LEARN T.TONE	MULTI	OUTPUT	DVD	1,4
			SET UP

Display

NOTES:

•The signals of the source selected in the MULTI mode are also output from the VCR-1 and VCR-2/V.AUX recording output terminals.

•Digital signals are not output from the multi source audio output jacks.

[3]Remote control unit operations during multi-source playback (selecting the input source)

This operation is possible when “6CH IN & MULTI” is selected at the System Setup Menu’s “EXT. IN & MULTI” setting screen. This operation is not possible in the REC OUT mode.

1	Set the slide switch to
	“AUDIO” and “MULTI”.

AUDIO	DECK	MD
	CD	MULTI
AVR/AVC	VIDEO
	DVD	TV
	VDP	VCR

(Remote control unit)

2	Press the input source	Example: CD
	button.

The multi source switches directly.

CD

8

(Remote control unit)

The remote control unit’s MULTI button canbe operated at positions other than “MULTI”.

The multi source switches in order each time the multi button is pressed.

MULTI

(Remote control unit)

[4]Remote control unit operation during multi-source playback (adjusting the volume level)

The volume can only be adjusted when “6CH IN & MULTI” is selected at the System Setup Menu’s “EXT. IN & MULTI” setting screen and “Variable” is set at the “MULTI VOL. LEVEL” screen.

DVD VDP TUNER SHIFT

1	Set the slide switch to	AUDIO	DECK	MD	1	2	3
					TV/DBS		PHONO
	“AUDIO” and “MULTI”.		CD	MULTI	4	5	6
					VCR-1	CD	MD / TAPE CHANNEL
		AVR/AVC VIDEO			7	8	9
			DVD	TV	VCR-2/V.AUX		TV/VCR
					+10	0
							A / B
			VDP	VCR
		(Remote control unit)			VOLUME		DISC SKIP+
2	Use the VOLUME buttons to adjust the		VOLUME			DOLBY / DTS
					SPEAKER	SURROUND	DIRECT
	volume level.				INPUT MODE	ANALOG	EXT.IN
					DSP SIMULATION 5CH STEREO		STEREO

MASTER VOL.

	AUDIO		DECK	MD
			CD	MULTI	MUTING
	AVR/AVC	VIDEO	DVD	TV
(Remote control unit)			VDP	VCR
	TUNING		SYSTEM		SURROUND
			SETUP		PARAMETER

2

1

42