Denon AVR-3300 manual Playback using the external input EXT. in jacks

Playback using the external input (EXT. IN) jacks

1	Set the external input (EXT.	EXT.IN
	IN) mode.
	Press the EXT. IN to switch
	the external input.
	(Main unit)	(Remote control unit)

Once this is selected, the input signals connected to the FL (front left), FR (front right), C (center), SL (surround left) and SR (surround right) channels of the EXT. IN jacks are output directly to the front (left and right), center and surround (left and right) speaker systems as well as the pre-out jacks without passing through the surround circuitry.

In addition, the signal input to the SW (subwoofer) jack is output to the PRE OUT SUBWOOFER jack.

When 8CH EXT. IN is selected, the input signals connected to the EL (effect left) and ER (effect right) jacks are output to the PRE OUT effect (left and right) jacks.

Refer to page 26 for setting the number of external input channels.

2	Cancelling the external input mode
	To cancel the external input (EXT. IN) setting, press the input
	mode (AUTO, PCM, DTS) or ANALOG button to switch to the
	desired input mode. (See page 38.)
	AUTO	PCM	DTS	ANALOG NPUT MODE ANALOG

(Main unit) (Remote control unit)

•When the input mode is set to the external input (EXT. IN), the play mode (DIRECT, STEREO, DOLBY/DTS SURROUND, 5CH STEREO or DSP SIMULATION) cannot be set.

ENGLISH

	VOLUME				DISC SKIP+
		DOLBY / DTS
	SPEAKER	SURROUND		DIRECT
	DSP SIMULATION	5CH STEREO STEREO
					MASTER VOL.
2	INPUT MODE	ANALOG		EXT.IN		1
	AUDIO		DECK	MD
			CD	MULTI	MUTING
	AVR/AVC	VIDEO	DVD	TV
			VDP	VCR
			SYSTEM		SURROUND
	TUNING		SETUP		PARAMETER
	BAND		TITLE		MENU/GUIDE
				CH SELECT
	MODE			ENTER
				SELECT

NOTES:

•In play modes other than the external input mode, the signals connected to these jacks cannot be played. In addition, signals cannot be output from channels not connected to the input jacks.

•The external input mode can be set for any input source. To watch video while listening to sound, select the input source to which the video signal is connected, then set this mode.

Multi-source and multi-zone playback

MULTI ROOM MUSIC ENTERTAINMENT SYSTEM

•When the outputs of the MULTI SOURCE AUDIO OUT terminals are wired and connected to integrated amplifiers installed in other rooms, different sources can be played in rooms other than the main room in which this unit and the playback devices are installed. (Refer to ANOTHER ROOM on the diagram below.)

•When a sold separately room-to-room remote control unit (DENON RC-616, 617 or 618) is wired and connected between the main room and another room, the remote-controllable devices in the main room can be controlled from another room using the remote control unit.

*To control playback devices other than the ones above, either use that device’s remote control unit or preset a separately sold programmable remote control unit.

NOTES:

•For the AUDIO output, use high quality pin-plug cords and wire in such a way that there is no humming or noise.

•For instructions on installation and operation of separately sold devices, refer to the devices’ operating instructions.

MULTI ROOM MUSIC ENTERTAINMENT SYSTEM

ANOTHER ROOM	MAIN ROOM
	RC-617
INTEGRATED
AMPLIFIER
PROGRAMMABLE	AVR-3300
REMOTE
CONTROL UNIT

	SYSTEM REMOTE
RC-616	CONTROL UNIT RC-860

ROOM-TO-ROOM REMOTE CONTROL SYSTEM (separately sold) control line

MULTI SOURCE AUDIO signal cable

SPEAKER cable

*Refer to CONNECTIONS on pages 7 to 14.

43