Denon AVR-590 Connections, Monitor (TV)

ENGLISH

Getting									Connecting devices
			Connections						n Connecting to a device equipped with a DVI-D
Started
			devices and output to 1 TV.						When an HDMI/DVI conversion cable (sold separately) is used, the
			The AVR-590 allows connection of inputs from up to 3 HDMI						connector
									HDMI video signals are converted to DVI signals, allowing connection
Connections
									to a device equipped with a DVI-D connector.
					DVD	)%.*
					Player	065			NOTE
									• No sound is output when connected to a device equipped with a
			Blu-ray
						)%.*			DVI-D connector. Also make the audio connections.
Settings		Disc Player				065
									• Signals cannot be output to DVI-D devices that do not support
									HDCP.
	SAT/CABLE						)%.*		• Depending on the combination of devices, the video signals may not
Playback			Tuner				065		be output.
									n Settings related to HDMI connections
				Monitor				)%.*
									Set as necessary. For details, see the respective reference pages.
Remote					(TV)			*/
									Input connector assignment (vpage 31)
Control									Set this when changing the input sources of the different connectors.
									HDMI Setup (vpage 27)
									Make these settings related to HDMI input/output signals.
Information									• Auto Lip Sync
			• Use a cable on which the HDMI logo is indicated (a certified HDMI						• HDMI Audio Out
									• Power Off Control
			product) for connection to the HDMI connector. Normal playback						• HDMI Control
			may not be possible when using a cable other than one on which the						• Standby Source
			HDMI logo is indicated (a non-HDMI-certified product).
Troubleshooting			• When the AVR-590 is connected to other devices with HDMI cables,						NOTE
			the monitor’s resolution. In this case, switch the Blu-ray Disc player /
			also connect the AVR-590 and TV using an HDMI cable.						The audio signals output from the HDMI connectors are only the
			• When a device supporting Deep Color signal transfer is connected,						HDMI input signals.
			use a cable compatible with HDMI ver.1.3a.
			• Video signals are not output if the input video signals do not match
Specifications			DVD player’s resolution to a resolution with which the monitor is
			compatible.
			NOTE
			• If the menu “HDMI Audio Out” setting (vpage 27) is set to “AMP”,
			the sound may be interrupted when the monitor’s power is turned
			off.
			• The audio signal from the HDMI output connector (sampling
			frequency, number of channels, etc.) may be limited by the HDMI
			audio specifications of the connected device regarding permissible
			inputs.

Connecting Devices not Equipped with HDMI connectors

Monitor (TV)

•Select the terminal to use and connect the device.

•For video connections, see “Converting input video signals for output (Video Conversion Function)” (vpage 9).

For instructions on HDMI connections, see “Connecting Devices Equipped with HDMI connectors” on page 12.

Monitor (TV)

	"6%*0			7*%&0
015*$"-		7*%&0	$0.10/&/5 7*%&0
065		*/	*/
			: 1# 13

The component video connectors may be indicated differently on your monitor. For details, see the monitor’s operating instructions.

13