ENGLISH

Setting items

 

Setting contents

 

 

 

 

Channel Level

 

 

Test Tone Start : Output test tones.

Set the volume of the test

FL (Front L)/ C (Center)/ FR (Front R)/ SR (Surround R)/

tone to be the same when it

SBRz (Surround Back R)/ SBLz (Surround Back L)/ SL (Surround L)/

is output from each speaker.

FHL (Front Height L)/ FHR (Front Height R)/ SW (Subwoofer) : Select

 

 

 

 

 

the speaker.

 

 

 

 

 

zWhen the “S.Back” setting (vpage 25) is set to “1ch”, “SB” is

 

 

 

 

 

displayed.

 

 

 

 

 

• –12.0dB ~ +12.0dB (0.0dB) : Adjust the volume.

 

 

 

 

 

• When “Channel Level” is adjusted, the adjusted values are set for

 

 

 

 

 

all the surround modes. To adjust the channel level separately for the

 

 

 

 

 

different surround modes, use the operation see “Adjust the volume of

 

 

 

 

 

the different speakers” (vpage 45).

 

 

 

 

 

• Speakers set to “None” in the “Speaker Config.” (vpage 25) settings

 

 

 

 

 

are not displayed.

 

 

 

 

 

• When o is pressed while the subwoofer volume is set to “–12dB”, the

 

 

 

 

 

“Channel Level” setting switches to “OFF”.

 

 

 

 

 

• If output of the test tones begins while the muting mode is set, the

 

 

 

 

 

muting mode is canceled.

 

 

 

 

 

Default : Reset all channel level settings to factory default.

 

 

 

 

 

Yes : Reset to the defaults.

 

 

 

 

 

No : Do not reset to the defaults.

Crossover Frequency

 

Crossover : Outputs at below set frequency, each speaker’s bass signal

Outputs

at

below

set

output from the subwoofer.

frequency,

each

speaker’s

• 40Hz / 60Hz / 80Hz / 90Hz / 100Hz / 110Hz / 120Hz / 150Hz / 200Hz /

bass signal output from the

250Hz

subwoofer. Set this according

• Advanced : Set the low frequency signals to be output from the signals

to the

low

frequency

of the respective speakers to the subwoofer.

reproduction

capabilities

of

• Front / Center / Surround / S.Back / Front Height : Select the speaker.

the speakers you are using.

· 40Hz / 60Hz / 80Hz / 90Hz / 100Hz / 110Hz / 120Hz / 150Hz / 200Hz /

This can be set when

250Hz : Set the crossover frequency.

 

“Speaker

 

Config.”

–

 

“Subwoofer”

(vpage

 

25)is set to “Yes” or “No”.

 

 

Making detailed settings (Manual Setup)

 

 

 

Setting items

 

Setting contents

 

 

 

Crossover Frequency

 

• Always set the crossover frequency to “80 Hz”. When using small

 

 

 

 

 

speakers, however, we recommend setting the crossover frequency

 

 

to a higher frequency.

•For speakers set to “Small”, sound below the crossover frequency is cut from the sound output. The cut bass sound is output from the subwoofer or front speakers.

•The speakers that can be set when “Advanced” is selected differ according to the “Bass Setting” setting (vpage 25).

·When “LFE” is selected, speakers set to “Small” at “Speaker Config.” (vpage 25) can be set.

·When “LFE+Main” is selected, speakers can be set regardless of the speaker size setting.

Specifications Troubleshooting Information Control Remote Playback Settings Connections Started Getting

Remote control

:

Displaying the menu

: Moves the cursor (Up/Down/Left/Right)

: Decision the setting

: Return to previous menu

26

operation buttons

Cancel the menu